Root and Install CWM or TWRP Recovery in Micromax A110 Jelly Bean 4.1

This is easiest method of Root and Install CWM or TWRP Recovery in Micromax A110 Jelly Bean 4.1 and Cynus T2 Jelly Bean 4.1. In this method we are rooting and install CWM or TWRP custom recovery in Micromax A110 Canvas 2.

Micromax A110 is superb phone and first popular phone from Micromax side. It has 1GHz Dual core processor with MT6577 chipset. Canvas 2 has 512MB RAM, 4GB Rom with 4.1.1 Android Jelly Bean. It has 5MP rear camera and 0.3MP front camera for video chat. Micromax A110 Canvas 2 got third update Stock Rom V3 Jelly Bean and previous update was Stock Rom V2 ICS 4.0.4. Now this update your phone with Jelly bean.

Root Micromax a110 Canvas 2, because root allows for you to use a maximum of your phone without any restrictions. After root you will install custom apps, custom Rom and custom setting in your phone. We already discuss on Root Advantage and Disadvantage by earlier post and we already saw “How to Root Micromax A110 Canvas 2” in this post.

Must read : TWRP 2.5.0.0 and ClockWorkMod 6.0.3.2 Recovery for Micromax A110

Preparation of flash or update:

1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Make sure proper power backup of your PC.
4. Read all steps then do it careful.

Download Micromax A110 Canvas 2 ROM and Tool:

1. Micromax A110 Canvas 2 MT6577 Scatter file Download
2. Micromax A110 Canvas 2 SP Tool v3.1220 Download
3. Micromax A110 Canvas 2 USB Driver Download.
4. Micromax A110 Canvas 2 CWM Recovery Download
5. Micromax A110 Canvas 2 TWRP Recovery Download
6. Micromax A110 Canvas 2 Update-SuperSU.zip file Download

How to root and install CWM or TWRP Recovery in Micromax A110 Jelly Bean:

Step 1: Install drivers in your PC (If you feel any problem in install driver then watch this video Click here)  and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.

Enable-debugging

Step 2:  Download SuperSU file and copy in your phone memory card. Now Download CWM recovery and scatter file of your phone and extract these file in a folder where you want. Extract and open the SP Tool. Sptool.exe Run as Administrator.

SP-Tool

Step 3: You will see an SP tool window, now click on the scatter-Loading option in the SP tool. Then you will get the new tab of SP Tool which you ask the location of the scatter file on your PC. Now select the “Android_scatter_emmc.txt”  file. See in this image.

select-the-file-Android-scatter-file

Step 4: Now connect your switch off phone with PC via USB cable (Make sure your phone is switched off).

Connect-your-Phone

Step 5: SP Tool detect your phone and process will start. If SPtool is not recognize/detect your phone then install vcom driver read this post it will help you click here  (Driver already in phone flash drive if you don’t have these drivers then install it)

Root-via-Sptool

Step 6: Now start installing recovery in your phone by flashing.

start-downloading-recovery

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 7:  After the process complete, a green ring will appear.

green-ring

Step 8: Disconnect your phone.

Step 9: Do not start your phone. Press and hold vol. up & down + power button then select “recovery mode” (If your touch not work then use volume up and down key for menu up and down and Power button as a enter button)

recovery-mode

Step 10. Click on install button/ choose install and select SuperSU-v2.01.zip file from your save location on your SD card and install this file. Now  reboot your phone.If you feel any problem then watch this video click here. Enjoy Rooted phone.

Must Read: Simple tips for make your Android phone faster

I hope you like this Root and Install CWM or TWRP Recovery in Micromax A110 Jelly Bean 4.1 guide from which you will be able to easily Root and Install CWM or TWRP Recovery in Micromax A110 Jelly Bean 4.1 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

304 response on “Root and Install CWM or TWRP Recovery in Micromax A110 Jelly Bean 4.1

  1. satpal

    Sir,
    I have used micromax canvas 2 A 110. I have faced in hindi messaging some font is not show properly. Pl sir tell me solution for this.

    Reply
  2. Subroto Mullick

    Hi Abhishek
    I updated my canvas 2 A110 successfully as per your instruction to jelly bean but after update when i go to recovery mode i am unable to handle or operator any of the buttons i can see all the banner like install wipe backup recovery etc but neither through volume button nor through touch i can operate it, please help me how to solve this problem.

    Thank you
    Subroto Mullick

    Reply
  3. Himanshu Mishra

    Hello…mere set me ek problem hai…bar bar 1.50 rs deduct ho jaate hai….maine root explorer se jakar smsreg.apk bhi deete kar diya hai phir bhi…pls help me

    Reply
  4. Nikhil Kshirsagar

    hey bro need your help….i have micromax canvas 2 device which is rooted by your procedure earlier….now i want to swap my interal and external sd with one another so that i can play HD games on my device….so plz tell me the detail procedure to swap memorty….waiting for yor reply…..Thanks in advance…:)

    Reply
    1. Nikhil Kshirsagar

      thanks alot…..but one more question when i m trying to run the high profile games like fifa14, nfs it show downloading and then failed automatically….wherever i have already downloaded full game and put data files in android/opp folder…even though it showing me the same error….now plz tell me how to link that game….?

      Reply
  5. rohit shimpi

    i trie loading scatter file but i see
    [xml Exception] Failed to create an xml document
    [Hint] Plese check if MSXML6 is installed.
    (file./XMLDocument.ccp,line 134)

    please help me
    thank

    Reply
  6. Vishal Bakale

    hii friend ,
    my mobile is micromax a110 with official jally bin 4.1.1 and i want root my phone …..
    but how to root …plz halp mi how to root my phone plzzzzz sir….

    Reply
  7. Vishal Bakale

    hii friend ,
    my mobile is micromax a110 with official jally bin 4.1.1 and i want root my phone …..
    but how to root …plz halp mi how to root my phone plzzzzz sir….

    Reply
  8. BALJIT SINGH

    sir i installed all drives and vcom drives

    im load the all scatter files then i click the dow button.
    and connect the mobile but sp flash is pop up error COM59 PORT

    sir i stil using the micromax a110 jelly bean

    help me sir

    Reply
  9. BALJIT SINGH

    Sir,

    COM port59 ERROR
    i installed all drives but i click on download button and connect mobile without battery
    Flash tool POP Up ERROR COM59 PORT

    Please help sir/ my mobile is MICROMAX A110 Jelly bean

    Reply
  10. mightyseraph

    Hello Abhishek,
    I have followed this article and flashed CWM using SP tools and i get the "green ring" at the end showing success. But when i select recovery mode after the key combination boot, it just performs a factory restore of the phone. Please help. Currently device is unrooted and unable to install CWM due to the above reason.
    Thanks in advance.

    Reply
  11. Dilip Solanki

    today i try it but when i try to load a recovery file using flash and connect my cel after presing a downlod red line will completed bt after that the error is occur it say please supply a tool version,GUI screen shot and tool logs.

    Reply
  12. sam

    hi,

    i had done all steps.To install new rom i have placed .zip of rom file to internal as well as external sd card but in cmw option install from sd card and from internal card .zip file is not showing were as super user.zip file is there. then i move back to my original v3 recovery.img and it shows the rom.zip file but it says intallation abort. i have download CWMR v6.0.2.8 and CWMR v6.0.2.7 both have same problem. please help

    Reply
  13. Zulema

    HI I am trying to root my A110 but when I try to load scatter file it shows an error "Initializing scatter file failed. Please check the name of scatter file is legal". Downloaded all the tools from this website.

    Trying using cynus t2 version 17.0. Using win 8 32 bit OS

    I am new to this pls help. Thanks in advance

    Reply
  14. Zulema

    Hi bro I tried to load the scatter file but it shows error "initializing scatter file failed. check the name of scatter file you load is legal". We have to load scatter.txt.

    Trying with Cynus t2 JB.

    Please help, thanks.

    Reply
  15. Sreejit Sarkar

    I have Bought Micromax Canvas2 with oficial Jelly bean 4.1.1
    But I have tried so many Root processess.. they are not working,
    suggest me a easy and proper rooting process for my phone please..
    ( note: Micromax Canvas2 with official Jelly Bean 4.1.1 )

    Waiting for a Reply..

    Reply
    1. Abhishek Sharma Post author

      How to Install vcom Driver?

      download Vcom Driver

      then extract vcom folder

      then right click on my computer

      click on manage

      then after click on device manager

      now connect your switch off phone to PC

      now you will see yellow icon on your phone hardware

      right click on this hardware then choose update driver option
      select second option browse my computer for the driver

      click on browse

      select vcom driver folder and

      then ok and next

      now driver installing

      that's all

      Reply
    2. Abhishek Sharma Post author

      how to install vcom driver?

      download and extract vcom zip file

      right click on my computer –> manage–> Device manager –> then connect your switch off phone –> now you will see yellow icon on your phone hardware –> right click on this device–> choose update diver—> click on second option browse my computer for driver software –> click on browse –> choose –> vcom driver folder then click ok and next

      that's all

      Reply
  16. krishna Maheshwari

    I want to know that after rooting my canvas 2 if I reboots my phone . Will any problem appear like all app will uninstall or all the data which is important for my will romove from my phone

    Reply
  17. krishna Maheshwari

    I have upgraded my canvas2 ICS to jelly bean 4.1.1 by service center . now I am trying to root my phone but like you said to replace the recovery.IMG in Micromax A110 Jelly Bean ROM Folder but I can't find this folder in my PC so please help me
    Huury

    Reply
  18. Udit Saini

    sir,maina scateer loading ka baad download ka button press karna k baad koi processing hi nhi hoti h maina sir 20 – 25 min dekha par kuch bhi nhi aata . plz help sir

    Reply
    1. Udit Saini

      green ring aana ka baad maina vol up +vol down + power ka button dawakar on kiya par sir
      3 option aaye 1 recover mode
      2 fast boot
      3 normal boot
      uska baad maina recovery mode choose kar par uska baad option aaye par koi bhi button na kam nhi kiya after the 1 min TWRP LOCK lag gaya
      plz help me sir

      Reply
  19. vishal jain

    Hey
    I m using android 4.1.1 jelly bean in my micromax a110 i had install it by sp tools but know i want to root my phn n install android 4.2 but when i root my phn it dispaly a msg that root permission denied .. so help me plz

    Reply
  20. nikhil sidar

    hi abhishek
    i've flashed my device mmx A11o with v3 rom but its not switching on,it display only "canvas" and nothing happening…..
    so pls suggest me wat to do so that i can switch on my device……..

    Reply
  21. nikhil sidar

    i have flashed my device Mmx A110 with V3 rom but its not switching on…..
    only "CANVAS" displays while i switch on the phone……
    pls help me what can i do????
    my phone is not satrting……?????

    Reply
  22. nikhil sidar

    hi abhishek……
    as i have rooted my mmxA110, i had installed "canvas4 v1.1. zip" through cwm recovery mode but now i wanted to instll "suvi rom v3" in my device but as i was trying to install it. it says the installation is aborded" & now my phone is not starting so pls tell me what can i do?

    Reply
    1. Abhishek Sharma Post author

      hi nikhil
      use always stock Rom and Cynus t2 17.01 is best Rom for micromax A110

      solution of your problem flash V3 Rom then Root aftert that install suni Rom

      Reply
  23. nikhil sidar

    hi abhishek,
    my device is micromax A110 i was trying to root my device i have gone through all steps but at last when it comes to select recovery mode and then option came INSTALL then it Doesn't INSTALL at all so what can i do………..
    pls help me…….

    Reply
  24. Yash Warke

    Hey I have V3 1.11 on my device….Is there any different method for rooting my device…..I updated my phone via care centre……plzzz help me…..

    Reply
  25. Rahul Menothuparambil

    sir i am having a secrious problem with my micromax a110 i have installed mobistel cynus t2 custom rom and now my problem is that i canot root my phone and my dual sim is not working only one sim is working i canot understand whyy ??? sooo sir plzz iff u can help i would be pleased sir u r the hope for me now i searched the whole of websites i cant do any thing

    Reply
  26. Gurpreet Bhagat

    no brother its installed.when i flash rom with sp tools i connect my phone to pc its stay only for 2sce. and automatic disconnect.its a big problem.also my phone not root. plz help me brother

    Reply
  27. Anonymous

    Bro! my micromax canvas 2 was in boot loop of some custom rom. so when i tried to install stock rom using sp tools it showed some error and the flash process stopped midway. Now i cant switch on my phone. its completely dead. Help please. i read earlier comments. is my phone bricked?? :(

    Reply
    1. Abhishek Sharma Post author

      try it
      1. Remove your battery once and fit it back.
      2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
      3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
      5. Don't leave the power button immediately.
      6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
      7. After this the boot logo will come. Once it comes, your mobile will start charging.

      Reply
    2. Anonymous

      thanks!! i hope this works!! i charged my battery and tried flashing but when i connect my phone to the laptop..my laptop shows unindentified device n sp tools doesnt recognise ma phone!! i have all drivers installed!! God its killing me!!

      Reply
  28. Gurpreet Bhagat

    sp tool error code 3013.every think ok but when i click download and connect phone,its remove automatic so sp tool give error.all driver are ok.plz help me Brother……..

    Reply
  29. Ullas

    Hey Bro..
    firstly thanks for posting this.. :)
    I have upgraded to Jelly bean yesterday and now i wanna root my A110
    i have followed all the steps mentioned, but when i run the Update-superSU-V1.04.zip..
    it says installation aborted, i am not sure where i am going wrong, Also where do i find the ROM folder in SD card
    Could you please help me..?

    thanks

    Reply
  30. Nikhil Kshirsagar

    hey dear….once again i need ur help…i buy a new handset named sony xperia E dual….and nw i wanna root it…so will u plz tell me how to root it…!..plz reply as early as possible….!

    Reply
  31. Anonymous

    well that helped what u said!! coz i tried to connect my phone to sp tools but the sp tool doesnt recognise my phone!so i cudnt install the rom!! if u have any video or link regarding this problem kindly post it!! thanks

    Reply
    1. Raju

      1. switch off your phone
      2.now remove ur fone's battery and keep it aside.
      3.go to the folder where u have extracted sp flash tools. Run it as administration.
      4.click on scatter loading option and browse for the folder where u have extracted jb(or ics rom).
      5.now click on firmware upgrade option if flashing jb or if flashing ics click download option.
      6.connect ur fone to pc.
      Let the process complete. After it completes reinsert the battery and switch on ur fone.
      And wid this u should have successfully unbricked ur fone..

      Reply
    2. Anonymous

      sp tools is not recognising my fone!! n really thanks for all this help guys!! really mean it!! n keep it cming!!

      Reply
    3. Anonymous

      i gave my canvas 2 to service station n they said may be ic is not working n they will check n tell!! meanwhile i kindly ask u to find some ways if possible to fix this problem of mine!! thanks!

      Reply
    4. Abhishek Sharma Post author

      if your phane has IC problem then i can't help you because it is hardware issue.

      and you have hardware issue then it is free service by service center because your phone is in warranty

      Reply
    5. Anonymous

      bro! my canvas 2 is not coming on! its completely dead!! this happened after i was trying to install stock rom using sp tools but the process dint take place properly after which my phone got bricked i guess!! i tried removing battery n then trying flashing but sp tools dint recognise my fone!! please help!! i am waiting for ur reply!!

      Reply
    6. Abhishek Sharma Post author

      charge your phone 2 hours
      then open sptool run sptool.exe as administrator if you are use windows 7 or 8 and vista then load scatter file
      click to download button after that connect your phone via USB cable to PC
      after few min PC recognize your phone and process will start
      after complete start your phone

      good luck

      Reply
    7. Anonymous

      bro i tried that but sp tools didnot recognise my phone!! i kept it for long time!! please help!! my phone is dead from past one week!! is there any way i can talk to u or probably give u my phone n u cud fix it for me!!

      Reply
    8. Abhishek Sharma Post author

      i want to try but ……
      which operating system you are use?
      did you try different port of USB like back penal?
      did you charge your phone, because some time problem is battery drain ?
      could you try another way to battery charge?
      did you try different USB cable ?

      Reply
    9. Anonymous

      win 7 os in my laptop!! and i have no other way to charge my phone!! only 1 usb cable!!n when i connect the laptop recognises it but then after some time it shows unidentified device n driver dint install! thats why sp tools also doesnt recognise the phone!!

      Reply
    10. Anonymous

      its 32 bit!! and i installed almost all the driver looking at the post from ur site only!!

      Reply
    11. Anonymous

      vcom is installed!! i saw ur video!! n using this cable only i rooted ma phone earlier!! this cable is fine!! but still i will change the cable n try!! but i think u can take my phone and try once!! :P r u in mumbai!!

      Reply
    12. Anonymous

      hey man i m back with some trouble!! i had given ma phone to customer care mmx!! but they r returning the phone to me n sed they cant repair it!! :( i really need ur help!! N thanks a lot for all the suppory earlier!! really appreciate ur work!!

      Reply
    13. Abhishek Sharma Post author

      try it

      1. Remove your battery once and fit it back.
      2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
      3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
      5. Don't leave the power button immediately.
      6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
      7. After this the boot logo will come. Once it comes, your mobile will start charging.

      Reply
    1. Anonymous

      n can i install this recovery the same way or is there any other procedure?? i m sorry if these questions seem stupid but i m new to this so please bear with me.. n thanks a lot :D waitin 4 ur reply!! :)

      Reply
    2. Anonymous

      Thanks a ton bro!! it brought a huge smile on ma face n i pray u ll always have a smile like this!! great job!! keep up the gud work!!

      Reply
    3. Anonymous

      bro the rooting was succesful then i installed one rom using twrp but the phone wud hang at the boot animation it wud not go ahead. then i tried installing official jb using sp tools!! but the phone is not coming on!! what so ever!!
      pl help!! i feel so screwed!!

      Reply
    4. Abhishek Sharma Post author

      don't worry about it

      remove battery then put it again

      do not switch on your mobile

      click down load button

      then connect your off mobile to PC

      it take few min

      Reply
    5. Anonymous

      i gave it time!! now the sp tools cant recognise ma fone itself!!
      also if i put it to charge the charging screen doesnt come on!!

      Reply
    6. Anonymous

      bro do u think i have bricked it?? n is it possible to fix ma fone!! pl help!! i m really tensed here!!

      Reply
    7. Abhishek Sharma Post author

      this phone not hard brick
      it is only soft brick and it is under warranty so, don't worry
      if your will not get back then go to service station

      try to recover

      good day

      Reply
  32. Anonymous

    hey bro!! 1st of all thanks a lot. but i have experienced a problem.. touch doesnt work in twrp mode i cant select any option and so i cant install super su.. please help.. also now if i want cwm mode can i repeat the procedure with cwm recovery image? will it cause any prob o do i have to install twrp only!? please help!! waiting for ur reply!! thanks!!

    Reply
  33. Anonymous

    I'm trying to this step 8 To 10 Time but i face same problem, no touching or clicking any option, and i've also UPDATE-SuperSU-v1.04.zip file.

    Reply
  34. Anonymous

    whats the problem?
    My phone details.
    Android Version: 4.1.1
    Build Number: ALPS.JB.MP.V1
    Custome Build Version: S9081_MP_F4.1_B1_IN_MMX_1.11

    Reply
  35. Anonymous

    Hello…
    Dear, My All Process Done But when Last Recovery Step [power button & both volume key] i saw 9 option [install] [wipe] [backup] [restore] [mount] [setting] [advanced] [reboot], but can't Click Or Touch any option….
    Now How To Install " UPDATE-SuperSU-v1.04.zip " file…..

    Please help me,,,,,

    Reply
  36. Anonymous

    this not help me my frnd…when i do all these steps than aftr click on dwnld option when i connect my phone to pc its says…..

    [common hint for sp tool issue:-
    please supply ur tool version,GUI screen shot and too log…when u try it with the latest tool…
    1. Run tool
    2. press cntrl+alt+t[Run time trace mode]
    3. [Menu] Help-[Submenu] open logs folder

    BROM ERROR:-S_DA_SOC_CHECK_FAIL{2013}
    [USER] SOC VERIFICATION FAIL!
    [HINT]:

    tHIS is the error shows artr connect..!!

    Reply
    1. Abhishek Sharma Post author

      download rom folder and recovery & sptool, supersu update zip file

      then extract Rom folder replace recovery.img file in rom folder

      then open sptool run as administrator sptool.exe

      load scatter file untick all then tick only recovery

      click download then connect switch off phone

      finish disconnect go to recovery by pressing & hold Vol up & down key + power button

      select recovery mode then install supersu zip file

      finish

      Reply
  37. vas

    How to do step 2? How to replace it? Where is the file located? Download CWM Recovery/ TWRP Recovery and rename it as recovery.img then replace it with recovery.img of Micromax A110 Jelly Bean ROM Folder

    Reply
    1. Abhishek Sharma Post author

      yes it right

      after replacing open sptool

      run as administrator sptool.exe, load scatter file

      untick all, tick only recovery then flash

      after that do not start your phone go to recovery by pressing & hold vol. + & – key and power button

      install supersu

      Reply
  38. vas

    I just want to root the phone to rectify the NVRam error I got during update to JB. can I avoid the recovery option? The MAC address is changing continuously and NVram error appears in WiFi. So I want to remove this error and it requires rooting! Help please.

    Reply
  39. Anonymous

    try this
    Change ur imei by this method

    1- go to em with this code "* # * # 3646633 # * # *" (just type it on call pad)
    2- then follow that path –> CDS info –> Radio info –> Phone1 (for the first imei)
    3- at the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (instead of IMEI_1 put your first imei number)
    4- hit send command
    5-if you done just reboot the phone, if you change the second imei go to step 2 and select "Phone2"
    6-and enter the code "AT +EGMR=1,10,"IMEI_2" (instead of IMEI_2 put your second imei number) hit send command
    7-reboot

    This worked for me…

    THANK YOU VERY MUCH ABHISHECK… :)

    Reply
  40. Roxxx

    thnx bro but u misundrstood wt i said ok assume if my fone is running on cynus t2 den how i will install cwm/twrp ?????? bcoz i am unable to run flashtool :( and i cant root my fone widout installing cwm/twrp dats wt i am sayng

    Reply
  41. Roxxx

    but brothr again d fact is flashtool is really nt wrkng 4 me if i flash dis rom how i will root my fone and also widout flashng cwm/twrp i cnt flash ics back , is it not possible to flash ics by stock recovery ????????? as its a stock rom :(

    Reply
  42. Roxxx

    brothr can u provide me official ics stock rom and also cn u pls tell me dat is it possible to flash it thru stock recovery ????? coz i dnt thnk for me flashtool is really working

    Reply
  43. Roxxx

    brothr i hv done it still nt wrkng u thnk its bcoz of d drivers bcoz wen i connect d fone i cant see micromax a110 preloader as wen i update drivers it say its updated but wen i connect my fone it doesnt show :( i am really so pissed of wid dis jb update , ics wz better easy to root and update…

    Reply
  44. Abhishek Sharma Post author

    no you need to download rom and recovery & sptool, supersu update zip file

    then extract Rom folder replace recovery.img file in rom folder

    then open sptool run as administrator sptool.exe

    load scatter file untick all then tick only recovery

    click download then connect switch off phone

    finish disconnect go to recovery by pressing & hold Vol up & down key + power button

    select recovery mode then install supersu zip file

    finish

    Reply
  45. Roxxx

    hey bro i updtd my fone via care center so hw to replace d image file in rom as i dnt hav any rom and i followed all d steps but still stucked wt 2 do :( i saw ur vdo also .

    Reply
    1. Abhishek Sharma Post author

      it is very simplest method,

      let me check of you preparation of root

      did you download Jelly Bean rom V3?
      did you download recovery.img file?
      did you download Sptool ?

      Reply
  46. Roxxx

    i hav done it but no result bro same thng no progress :( and what do u mean by replAcing recovery and how to ?????? does it mean choosing i have chosen it but before scatter loading ???? where i didnt got u i thnk

    Reply
  47. Roxxx

    hiiiii ur rooting method is good but its truely nt wrkng i dnt realy knw wt is d prob , i found wen i try 2 press dwnld button it says not all images of recovery ar placed ssmthng like dat and download anyway if i click yes and den it shows nothng no progress it stucked dats it no green ring , drivers r properly installd nd it detect my device but ur tool is nt wrkng pls tell me d solution

    Reply
    1. Abhishek Sharma Post author

      you did mistake it is easiest method.

      first download custom recovery then rename it recovery.img and replace custom recovery to stock Rom recovery

      after that open sptool rus as administrator sptool.exe

      select scatter file uptick all, select only recovery

      click download button then connect switch off phone to PC

      process will start then finish

      do not on your phone

      go to recovery by pressing & hold Vol up and down key + power button
      select recovery then install supersu file

      good day

      Reply
  48. pankaj tripathi

    Sir pls tell me that how many times we change or format ROM on MMX a110 in safety purpose.

    Reply
  49. pankaj tripathi

    My ext SD card run by mount but today's morning when I switch on my mobile my internal SD card also be called damaged n my external SD card now not be mount its continues show damaged.many times I remove n inset SD card but no improvent.pls sir help me n if I install new jb (293 mb) then any advantage with this problem

    Reply
    1. pankaj tripathi

      But sir many people say that jellly bean v1.11 have many more problem with micromax a110.
      Its true or false?

      Reply
  50. pankaj tripathi

    N in recovery internal SD does not shown its show adb so I install super su from external SD card

    Reply
    1. pankaj tripathi

      Sir external SD card is not support after this rooting method.what can I do? Pls sir reply

      Reply
  51. pankaj tripathi

    no i cant.maine sirf copm pe sari file install ki n sp tool ke throw apna phone connect kerke update kiya hai

    Reply
  52. pankaj tripathi

    Sir I have complete this process n green ok is show.but jab Maine phone on kiya to sirf superphone ka logo aa raha.aur kuch bhi nahi ho raha.pls help me Mai kya Karu ?

    Reply
    1. Abhishek Sharma Post author

      hi pankaj

      after root did you go recovery mode or not

      because after root don't start phone first go recovery mode via press Vol. up & down key + Power Button
      then select recovery mode and install supersu

      Reply
  53. Nikhil Kshirsagar

    thanks a lottttt dear finally i hv rooted my device mmx a110….but nw plz tell me how to move default apps into sd card..??……and when i hv installed Hypermod rom in my device it will show error "unfortunately the process android.process.acore has stopped" why it is so…plz tell me how to fix this problem….and which rom is best for my device….:)

    Reply
    1. Abhishek Sharma Post author

      good, now enjoy rooted phone

      if you took backup of your mobile then restore

      if you did not take backup then re-install and take backup

      it is necessary because in rooted phone it is common problem

      good day

      Reply
  54. Anonymous

    Can you please tell me, whether the phone will reset if i flash recovery.img using SP tools…just the recovery.img in my v3 ROM official Jellybean?

    Reply
  55. Nikhil Kshirsagar

    plz help how to root latest mmx a110 jelly bean 4.1.1 pre installed????? and i m trying to run it in cwm mode but it always run in android system recovery mode….plz help how to run the cwm mode….!

    Reply
  56. Subramani

    Hi, I am trying to root my Micromax a110, however I am unable to find ROM folder. Where is this folder located?

    Reply
  57. Chaitu Chaitus

    Sir, for installing cmw rooting must be needed, im in official jb1.11 my camera is nt nice i patched vivid colour it works fine fr me thanku fir dis patch.., with out rooting we cannot install cmw

    Reply
  58. gaurav

    Sir I have flashed my a110 with ur kind step by step process and provided downloads…firstly I want to say that ur super genious…and very kind of heart…and second thiong is this that..when I flashed my mobile to mmx a110 4.1 rom and I started my cell there is one problem for me.., I m seeing that there is only on canvas written on boot screen amd on animation too….there is no canvas2 written on that…its boot animation is a89's boot animation..pls provide me a link to download the new a110 canvas2 boot animation and boot screen…and steps to replace it …..pls help me sir…pls….I will wait for ur..rply…thanks…Sir….

    Reply
    1. raja kannu

      Sir . Micromax a110 update s9081 .1.10 . Update flash able sir . Update is successful . But invalid imei here . sim management hide . What to do ? Sir pls considered my issues

      Reply
    2. Abhishek Sharma Post author

      try this
      Change ur imei by this method

      1- go to em with this code "* # * # 3646633 # * # *" (just type it on call pad)
      2- then follow that path –> CDS info –> Radio info –> Phone1 (for the first imei)
      3- at the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (instead of IMEI_1 put your first imei number)
      4- hit send command
      5-if you done just reboot the phone, if you change the second imei go to step 2 and select "Phone2"
      6-and enter the code "AT +EGMR=1,10,"IMEI_2" (instead of IMEI_2 put your second imei number) hit send command
      7-reboot

      Reply
  59. raja kannu

    Dear sir, I am using windows 8 operating system..I want to know whether this is compatible with this is…I also don't find Android gadget CDC driver.inf file in your download link..I have read and followed all the steps you send it to me…I could not update my mtk driver w1152.its displaying as" not enough storage".. so please fix my issue as soon as possible

    Reply
    1. raja kannu

      Dear sir ,
      I try a A110 X 86 driver . Some file missing vcom driver not install . Am not go next step . Pls preloder vcom driver how to install my 64 bit laptop . pls some mtk com driver web site link . Pls 64 bit USB mtk vcom driver link . Pls u r solution . pls genius help me

      Reply
    2. raja kannu

      Sir , I have all drivers . Windows 8 model . Cynus t2 ROM . What driver install sir . Not flashing sir . Connect the USB only charger simple only . Not a flash . How is send screen shot . I explain my problem . Mtk vcom install then my laptop not enough stroge ????? . How is accept MTK vcom driver

      Reply
    3. raja kannu

      Dear sir , pls u have any other idea . I think reinstall micromax a 110 4.04 original os . U suggest me sir . Now jelly bean4.1.1 I like but vodofone and aircel networks not working , my places only have vodofone and aircel signals . Last one month I try this problem not solve am upset sir . Pls I have only u r suggestions . U r my god pls save my mobile

      Reply
    4. Abhishek Sharma Post author

      i will try to my best but i am not god, god is god ok

      ell me few point

      1. your mobile is rooted?
      2. which version you use ?
      3. have you try replace modem.img?
      4. can you try all this on windows 7?

      Reply
    5. raja kannu

      Sir . Big thanks . u told all steps am implement now my mobile rooted . But network problem not clair . I try modem.IMG replace and change permission rw-r-r . Next sir waiting for or reply , pls slove my network problem

      Reply
    6. raja kannu

      Sir I try modem.IMG replace permission rw-r-r here . How is change wr-r-r . I have app root file manager and es file explore and download modem.IMG file . Pls u say how is change ???? Pls

      Reply
  60. raja kannu

    sir my mob complaints
    ** no root
    ** no su binary
    ** no vodofone and aircel network problem …. i have all downloads . how to install pls ,,,, pls screenshot or video post …….. am not understand u r steps , am first time use smartphone . pls release me this problem . i have only for ur answers

    Reply
  61. raja kannu

    sir atleast say which place in rom floder ?????*****.Download CWM Recovery/ TWRP Recovery and rename it as recovery.img then replace it with recovery.img of Micromax A110 Jelly Bean ROM Folder *************** i try system floders . i have not mobile now . pls consider my problem

    Reply
  62. raja kannu

    Root your phone (click here to how to root jelly bean) —> install root explorer —-> replace modem.img file from V2 ROM

    System/etc/firmware/modem.img replaces and set permission (rw-r-r)

    and Reboot……..Enjoy Jelly Bean

    DownloadModem.img V2 file

    sir u say steps i try step by step .
    * modem.img changed v2 rom set permission rw-r-r .repeated not working vodofone @ aircel network .
    * sir i try rooting not success . i try rooted mobile uncle tool . app say root android frist .
    * i dont know next, am very poor guy . i have one mobile only . no micromax
    service center my places . i hope only ur suggested
    * (1) vodpfone and aircel sim not working
    * (2) not rooted
    * (3)system updates not working . checking for update network connection faild ******* sir am waiting for ur suggest pls pls help . life long thank ur hand pls resolve my issue

    Reply
    1. raja kannu

      Download CWM Recovery/ TWRP Recovery and rename it as recovery.img then replace it with recovery.img of Micromax A110 Jelly Bean ROM Folder
      Load scatter file in SP-tool from Rom Folder and uncheck all options except recovery.img
      **sir sorry for the trouble .. i have cwm recovery.img and twrp recovery.img . how is rename , where is rom floder already have mobile ?? o or am create my laptop desktop . how is replace recovery.img
      u have any screenshot pls
      ** sp tool version
      ** already my mob system/etc/firmware/ permission rw–r–r
      ** pls my request . pls pls pls pls pls pls pls pls pls pls

      Reply
  63. raja kannu

    Sir pls help my issue am updated mobistel Cynus t2 . 2 nd sim not working vodofone and aircel network . Idea DoCoMo 2 and sim working pls find my issue

    Reply
    1. Amrut

      Hello Abhishek,

      Thanks for the reply but i think the hyperlink is missing.

      Also since the upgrade the Sending SMS is not working…. any thoughts on that?

      Regards
      Amrut

      Reply
    1. Abhishek Sharma Post author

      install driver
      Micromax A110 Vcom Driver
      switch off your phone
      open sptool run as administrator sptool.exe
      select scatter file
      then click Download
      then connect your switch off mobile
      not search then after few min battery icon come then disconnect
      then once again connect
      i think your phone will detect
      Good day

      Reply
    2. Onkar Mohite

      same problem with me,and how can i install vcom driver? its only notepad file,
      i also tried with device manager but it says,it is upto date!!!
      thanks

      Reply
  64. Anonymous

    Hi abhishek,

    Iam facing a strange problem i have updated my A110 from ICS to Jelly update from download link given by you.
    Everything is fine but one problem on every reboot a message is sent to micromax stating congratulations on purchasing and it deducting Rs 1.50 for the sms sent.

    Please provide any solutions as it deducting balance on every reboot.

    eagerly waiting for a solution.

    Reply
    1. Abhishek Sharma Post author

      if your phone is rooted phone then i can resolve your problem
      open root explorer go to system—.> app folder —-> press & hold smsreg.apk —> click on delete

      reboot
      resolve your problem

      Reply
    2. Anonymous

      install avg antivirus from google play and then go to to privacy and backup its simple backup apps are stored in "droidbackupdir" folder in sd card

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *