How to unbrick Xiaomi Redmi Note 3 MIUI 7 Stock Rom

Hi, This is stable stock Rom of Xiaomi Redmi Note 3 and here is a easy and safe guide to install or unbrick Xiaomi Redmi Note 3 MIUI 7. Xiaomi Redmi Note 3 comes with 5.5-inch IPS LCD display which provides 1080 x 1920 pixels resolution. The Xiaomi Redmi Note 3 is running on the Android 5.0.1 lollipop based MIUI 7 operating system. Xiaomi Redmi Note 3 powered by 2.0 GHz Octa-Core with Mediatek MT6795 Helio X10 chipset.

Preparation of flash or update:

1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Read all steps then do it careful.
4. Make sure proper power backup of your PC.

Must Read: Boost up Android Phone via Developer Mode

Download ROM and Tools of Xiaomi Redmi Note 3:

File NameDownload link
Xiaomi Redmi Note 3 MIUI 7 China Stable RomDownload
Xiaomi Redmi Note 3 SP Tool V5.1516Download
Xiaomi Redmi Note 3 USB DriverDownload

How to install or unbrick Xiaomi Redmi Note 3 MIUI 7:

Step 1: Install drivers on your PC (If you feel any problem in install driver then watch this video Click here) and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.

Enable-debugging

Step 2: Extract Stock ROM and SP Tool folder, where you want. Open the SP Tool and run Sptool.exe as Administrator.

run-Sptool-as-Administrator

Step 3: Click on Scatter-Loading option. SPTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.

Click-on-Scatter-Loading-option

Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).

click-on-Download

Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it). After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flash guide click here.

process-complete-green-ring-will-appear

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone. If you feel any problem of flashing or update your phone then watch this video click here.

Must Read: How to block unwanted phone calls and messages via voicemail feature

I hope you like this unbrick Xiaomi Redmi Note 3 MIUI 7 installation guide from which you will be able to easily install or unbrick Xiaomi Redmi Note 3 MIUI 7 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

Leave a Reply

Your email address will not be published. Required fields are marked *