How to unbrick LYF Wind 5 Stock Rom V1

Hi, This is an approved official Android 5.1 Lollipop Stock Rom V1 of LYF Wind 5 and this is a easy and safe guide to install or unbrick LYF Wind 5 Stock Rom V1. Follow this guide to update or flash your phone with Android 5.1 Lollipop Stock Rom V1.

This is a fully worked and approved unbrick hard bricked LYF Wind 5 guide. I have personally unbrick hard bricked LYF Wind 5 using these steps. When I bricked my LYF Wind 5, then I try so many methods and read lot of guides but I found many mistake in those guides, so I try to make a prefect guide for it and try to provide all required tools and drivers in this guide.

Preparation of flash or update:

1. Take a backup of your phone by this guide.
2. Your phone battery should charge 80% minimum.
3. Make sure proper power backup of your PC.

Must Read: How to Protect Google account with USB Security Key

Download ROM and Tools of LYF Wind 5:

File Name Download link
LYF Wind 5 Stock Rom V1 Download
LYF Wind 5 SP Tool V5.1612 Download
LYF Wind 5 USB Driver Download

How to install or unbrick LYF Wind 5 Stock Rom V1:

Step 1: Install drivers on your PC  and Enable Developer Mode and USB Debugging on your Phone by this guide. After then switch off your phone.

Enable Developer Mode and USB Debugging on LYF Wind 5

Step 2: Extract Stock ROM and SP Tool folder, where you want to save. Open the SP Tool and run Sptool.exe as Administrator.

Run SP tool as Administrator for LYF Wind 5

Step 3: Click on Scatter-Loading option. SP Tool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.

Load Scatter file by Scatter loading option for LYF Wind 5

Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).

Click Download in the SP tool for download ROM on LYF Wind 5

Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize or detect your phone then install vcom driver. After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flashing guide.

Finish flashing process of LYF Wind 5

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone.

Must Read: Important tips to keep safe important data of smartphone

Tips for LYF Wind 5 :

After install or unbrick LYF Wind 5 Stock Rom V1, you can root your phone because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, Rom and custom setting in your phone. But first read Root Advantage and Disadvantage then follow this root LYF Wind 5 guide.

I hope you like this unbrick LYF Wind 5 Stock Rom V1 installation guide from which you will be able to easily unbrick LYF Wind 5 Stock Rom V1 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

If you still have any query left or want to give any suggestions, then mail us at info.skyneel[@]