How to unbrick Elephone G5 Stock Rom V1

Hi, This is an approved official Android 4.4.2 Kitkat Stock Rom V1 of Elephone G5 and this is a easy and safe guide to install or unbrick Elephone G5 Stock Rom V1. Follow this guide to update or flash your phone with Android 5.1 Lollipop Stock Rom V1.

This is a fully worked and approved unbrick, hard bricked Elephone G5 guide. I have personally unbrick Elephone G5 using this guide. When I bricked my Elephone G5 , then I tried so many methods and read lot of guides but I found many mistake in them. So I try to make a prefect guide for it and provide all required tools and drivers in this guide.

Preparation of flash or update:

1. Take a backup of your phone by this guide.
2. Your phone battery should charge 80% minimum.
3. Make sure proper power backup of your PC.

Must Read: Show battery percentage on status bar in Android 6 Marshmallow

Download ROM and Tools of Elephone G5:

File NameDownload link
Elephone G5 Stock Rom V1Download
Elephone G5 SP Tool V5.1612Download
Elephone G5 USB DriverDownload

How to install or unbrick Elephone G5 Stock Rom V1:

Step 1: Install drivers on your PC (If you feel any problem in install driver then watch this video) and Enable Developer Mode and USB Debugging on your Phone by this guide. After then switch off your phone.

Enable Developer Mode and USB Debugging on Elephone G5

Step 2: Extract Stock ROM and SP Tool folder, where you want to save. Open the SP Tool and run Sptool.exe as Administrator.

Run SP tool as Administrator for Elephone G5

Step 3: Click on Scatter-Loading option. SP Tool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.

Load Scatter file by Scatter loading option for Elephone G5

Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).

Click Download in the SP tool for download ROM on Elephone G5

Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize or detect your phone then install vcom driver. After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flashing guide.

Finish flashing process of Elephone G5

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone. If you feel any problem of flashing or update your phone then watch this video.

Must Read: How to Lock Specific Apps on Android phone

Tips for Elephone G5 :

After install or unbrick Elephone G5 Stock Rom V1, you can root your phone because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, Rom and custom setting in your phone. But first read Root Advantage and Disadvantage.

I hope you like this unbrick Elephone G5 Stock Rom V1 installation guide from which you will be able to easily unbrick Elephone G5 Stock Rom V1 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

Leave a Reply

Your email address will not be published. Required fields are marked *