How to root Micromax A110Q and install CMW recovery

This post is a guide to root Micromax A110Q and install CMW recovery via Sptool. Micromax A110Q is updated version of Canvas 2. It is an outstanding phone and root make it powerful device. So root it and customize according to you and install custom app and Rom.

Preparation of flash/update:

1.  Take a backup of your phone Click here.
2. Take a backup of your IMEI no. by mobile uncle tool Click here.
3. Your phone battery should charge 80% minimum.
4. Read all steps then do it careful.
5. Make sure proper power backup of your PC.

Must read: Micromax A110Q-Micromax Release Stock Rom V2 update in simple steps

Downloads Root Tool:

1. Micromax A110Q Preloader_s9086b and scatter Download
2. Micromax A110Q SP-Tool Download
3. Micromax A110Q SuperSU Download
4. Micromax A110Q CWM recovery.img Download
5. Micromax A110Q USB Driver Download.

How to root Micromax A110Q and install CMW recovery:

Step 1: Install drivers in your PC  and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.

Enable-debugging

Step 2:  Download SuperSU file and copy in your phone memory card. Now Download CWM recovery, Preloader_s9086b and scatter file of Micromax A110Q and extract these file in a folder where you want.

scatter-file

Step 3: Extract and open the SP Tool. Sptool.exe Run as Administrator.

SP-Tool

Step 4: Click on Scatter-Loading option.

Scatter-Loading

Step 5: SpTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is our scatter file.

scatter-file

Step 6: Make sure Preloader and recovery selected. Now click on Download.

Download

Step 7: Connect your switch off phone with PC via USB cable  (Make sure your phone is switched off).

Connect-your-phone

Step 8: SP Tool detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here  (Driver already in phone flash drive if you don’t have these drivers then install it)

Flashing

Step 9: Now start downloading Stock Rom in your phone by flashing

flashing-2

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 10:  After the process complete, a green ring will appear.

green-ring

Step 11: Disconnect your phone. Now your phone is updated.

Step 12: Now disconnect your phone. Do not start your phone. Press and hold vol. up & down + power button then select “recovery mode” (If your touch not work then use volume up and down key for menu up and down and Power button as a enter button)

recovery-mode

Step 13. Click on install button/ choose install and select SuperSU.zip  file from your save location on your SD card and install this file. Now  reboot your phone. Enjoy Rooted phone.

Must read: New update Stock Rom V3 of Micromax A110Q Canvas 2 Plus

I hope you like this root Micromax A110Q and install CMW recovery guide from which you will be able to easily root Micromax A110Q and install CMW recovery without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

If you still have any query left or want to give any suggestions, then mail us at info.skyneel[@]gmail.com.