Hi, This is an approved official Android 5.1 Lollipop Stock Rom V1 of Micromax Q424 Bolt Selfie and this is a easy and safe guide to install or unbrick Micromax Q424 Bolt Selfie Stock Rom V1. Follow this guide to update or flash your phone with Android 5.1 Lollipop Stock Rom V1.
This is an Fully worked and Approved unbrick hard bricked Micromax Q424 Bolt Selfie guide. I have personally unbrick hard bricked Micromax Q424 Bolt Selfie using this guide. when i bricked my Micromax Q424 Bolt Selfie,then I try so many methods and read lot of guides but I found many mistake them, so I try to make a prefect guide for it and try to provide all required tools and drivers in this guide for bricked Micromax Q424 Bolt Selfie, it’s make this phone very smoother and faster. If we talk on gaming of this phone then we find Micromax Q424 Bolt Selfie performed very well.
Preparation of flash or update:
1. Take a backup of your phone by this guide.
2. Your phone battery should charge 80% minimum.
3. Make sure proper power backup of your PC.
Download ROM and Tools of Micromax Q424 Bolt Selfie :
|File Name||Download link|
|Micromax Q424 Bolt Selfie Stock Rom V1||Download|
|Micromax Q424 Bolt Selfie SP Tool V5.1612||Download|
|Micromax Q424 Bolt Selfie USB Driver||Download|
How to install or unbrick Micromax Q424 Bolt Selfie Stock Rom V1:
Step 1: Install drivers on your PC and Enable Developer Mode and USB Debugging on your Phone by this guide. After then switch off your phone.
Step 2: Extract Stock ROM and SP Tool folder, where you want to save. Open the SP Tool and run Sptool.exe as Administrator.
Step 3: Click on Scatter-Loading option. SP Tool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.
Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).
Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize or detect your phone then install vcom driver. After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flashing guide.
Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.
Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone.
Tips for Micromax Q424 Bolt Selfie:
After install or unbrick Micromax Q424 Bolt Selfie Stock Rom V1, you can root your phone because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, Rom and custom setting in your phone. But first read Root Advantage and Disadvantage, then follow this guide root Micromax Q424 Bolt Selfie.
I hope you like this unbrick Micromax Q424 Bolt Selfie Stock Rom V1 installation guide from which you will be able to easily unbrick Micromax Q424 Bolt Selfie Stock Rom V1 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.
Note: I am not responsible if you make Mistakes and Bricked Devices.