Unbrick Meizu M6 (Back to Stock Rom)

Hi, This is an approved official Android 7.0 Nougat Stock Rom of Meizu M6 and this is an easy and safe guide to install or unbrick Meizu M6 Stock Rom. Follow this guide to update or flash your phone with Android 7.0 Nougat Stock Rom.

This is a fully worked and approved unbrick, hard bricked Meizu M6 guide. I have personally unbrick Meizu M6 using this guide. When I bricked my Meizu M6 , then I tried so many methods and read lot of guides but I found many mistake in them. So I try to make a prefect guide for it and provide all required tools and drivers in this guide.

Preparation of flash or update:

1. Take a backup of your phone by this guide.
2. Your phone battery should charge 80% minimum.
3. Make sure proper power backup of your PC.

Must Read: Jio Browser Fast, Lite Version Launched for Android Phone

Download ROM and Tools of Meizu M6:

File Name Download link
Meizu M6 Stock Rom Download
Meizu M6 SP Tool Download
Meizu M6 USB Driver Download

How to install or unbrick Meizu M6 Stock Rom:

Step 1: Install drivers on your PC (If you feel any problem in install driver then watch this video) and Enable Developer Mode and USB Debugging on your Phone by this guide. After then switch off your phone.

Enable Developer Mode and USB Debugging on Meizu M6

Step 2: Extract Stock ROM and SP Tool folder, where you want to save. Open the SP Tool and run Sptool.exe as Administrator.

Run SP tool as Administrator for Meizu M6

Step 3: Click on Scatter-Loading option. SP Tool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.

Load Scatter file by Scatter loading option for Meizu M6

Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).

Click Download in the SP tool for download ROM on Meizu M6

Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize or detect your phone then install vcom driver. After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flashing guide.

Finish flashing process of Meizu M6

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone. If you feel any problem of flashing or update your phone then watch this video.

Must Read: How to Lock Specific Apps on Android phone

Tips for Meizu M6 :

After install or unbrick Meizu M6 Stock Rom, you can root your phone because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, Rom and custom setting in your phone. But first read Root Advantage and Disadvantage.

I hope you like this unbrick Meizu M6 Stock Rom installation guide from which you will be able to easily unbrick Meizu M6 Stock Rom without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

Leave a Reply

Your email address will not be published. Required fields are marked *