How to unbrick Lenovo K3 Note K50 T5 Stock Rom V1

Hi, This is an approved official Android 5.1 Lollipop Stock Rom V1 of Lenovo K3 Note K50 T5 and this is a easy and safe guide to install or unbrick Lenovo K3 Note K50 T5 Stock Rom V1. Follow this guide to update or flash your phone with Android 5.1 Lollipop Stock Rom V06.

Lenovo K3 Note K50 T5 comes with 5.5 inch HD display which provides 1920 x 1080 pixels resolution with Mali-T760MP2. Lenovo K3 Note K50 T5 has two outstanding features IPS capacitive touchscreen and Mediatek MT6752 chipset with 16M colors, it’s make this phone very smoother and faster. If we talk on gaming of this phone then we find Lenovo K3 Note K50 T5 performed very well.

Preparation of flash or update:

1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Read all steps then do it careful.
4. Make sure proper power backup of your PC.

Must Read: Manage Android App permissions to protect phone

Download ROM and Tools of Lenovo K3 Note K50 T5 :

File NameDownload link
Lenovo K3 Note K50 T5 Stock Rom V06Download
Lenovo K3 Note K50 T5 SP Tool V5.1616Download
Lenovo K3 Note K50 T5 USB DriverDownload

How to install or unbrick Lenovo K3 Note K50 T5 Stock Rom V1:

Step 1: Install drivers on your PC (If you feel any problem in install driver then watch this video Click here) and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.

Enable-debugging

Step 2: Extract Stock ROM and SP Tool folder, where you want. Open the SP Tool and run Sptool.exe as Administrator.

run-Sptool-as-Administrator

Step 3: Click on Scatter-Loading option. SPTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.

Click-on-Scatter-Loading-option

Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).

click-on-Download

Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it). After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flash guide click here.

process-complete-green-ring-will-appear

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone. If you feel any problem of flashing or update your phone then watch this video click here.

Must Read: Use GPS without internet connection in Android Mobile

I hope you like this unbrick Lenovo K3 Note K50 T5 Stock Rom V1 installation guide from which you will be able to easily unbrick Lenovo K3 Note K50 T5 Stock Rom V1 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

2 response on “How to unbrick Lenovo K3 Note K50 T5 Stock Rom V1

  1. Spencer Andre

    Ok, just one question, how am I supposed to Enable USB Debugging, if my phone is bricked, it won’t boot up, so I can’t Enable USB Debugging, what do I do now?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *