Hi, This is a safe and easy guide for Unbrick Coolpad Note 3 Lite Stock Rom V15. So many peoples flash wrong recovery and custom ROM on their Android device and result is bricked their devices. But it is not a matter of worry because here is a guide to Unbrick Coolpad Note 3 Lite Stock Rom V15 for you.
This is first approved ROM of Coolpad Note 3 Lite Stock Rom V15. Coolpad Note 3 Lite has 1.3GHz Quad core processor along with 3GB RAM and 16GB ROM. This phone has 5.0 inches IPS screen size with 1280*720 pixels. This phone has 13 mega pixels rear camera with LED flash and 5MP front camera in Coolpad Note 3 Lite. After reading this article you will be able to get the answer of your question How to Unbrick Coolpad Note 3 Lite Stock Rom V15.
Preparation of flash or update:
1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Read all steps then do it careful.
4. Make sure proper power backup of your PC.
Download ROM and Tools of Coolpad Note 3 Lite:
|FILE NAME||DOWNLOAD LINK|
|Coolpad Note 3 Lite Stock Rom V15||Download|
|Coolpad Note 3 Lite SP Tool V5.1408||Download|
|Coolpad Note 3 Lite USB Driver||Download|
How to install or unbrick Coolpad Note 3 Lite Stock Rom V15:
Step 1: Install drivers on your PC and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this click here). After then switch off your phone.
Step 2: Extract Stock Rom V15 and SP Tool folder, where you want. Open the SP Tool and run Sptool.exe as Administrator.
Step 3: Click on Scatter-Loading option. SPTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock Rom V15 folder. Now go to the Rom folder and select the file “MT6592_Android_scatter.txt” which is your Stock Rom V15 scatter file.
Step 4: Now Select firmware upgrade from dropdown menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).
Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it). After install Vcom driver connect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flash guide click here.
Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.
Step 6: Now start downloading Stock Rom V15 in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone.
After install Unbrick Coolpad Note 3 Lite Stock Rom V15, you can root your phone because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, Rom and custom setting in your phone. But first read Root Advantage and Disadvantage by this article, then here is a root guide: How to root Coolpad Note 3 Lite MIUI 6.
I hope you like this Unbrick Coolpad Note 3 Lite Stock Rom V15 installation guide from which you will be able to easily Unbrick Coolpad Note 3 Lite Stock Rom V15 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.
Note: I am not responsible if you make Mistakes and Bricked Devices.