Hi, This is a easy and safe tutorial of root Coolpad Note 3 and install TWRP recovery. In this guide you will find all steps with image, therefore it is safe and easy method of root Coolpad Note 3 and install TWRP recovery.
Coolpad Note 3 has 1.3 GHz Octa core processor along with 3GB RAM and 16GB ROM. This phone has 5.5 inches IPS screen size with 720 x 1280 pixels. This phone has 13 mega pixels rear camera with LED flash and 5MP front camera in Coolpad Note 3. Coolpad Note 3 is great phone and you must root Coolpad Note 3 and install TWRP recovery, because root allows for you to use a maximum of your phone without any restrictions. After root you will install custom Rom, apps, and setting in your phone. But before root you must read Root Advantage and Disadvantage by this post. Then after follow these steps to root your phone.
Preparation of flash or update:
1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Read all steps then do it careful.
4. Make sure proper power backup of your PC.
|FILE NAME||DOWNLOAD LINK|
|Scatter file of Coolpad Note 3||Download|
|SP-Tool v5.1540 for coolpad Note 3||Download|
|Driver for Coolpad Note 3||Download|
|TWRP Recovery for Coolpad Note 3||Download|
|SuperSU Zip for Coolpad Note 3||Download|
How to root Coolpad Note 3 and install TWRP recovery:
Step 1: First of all you must have to enable Developer option then enable debugging mode on your phone, here is guide click here. Now Install USB drivers on your PC.)
Step 2: Download SuperSU file and copy in your phone memory card. Now Download CWM recovery and scatter file and extract these file in a folder where you want to save. Extract and open the SP Tool and run Sptool.exe Run as Administrator.
Step 3: You will see an SP tool window, now click on the scatter-Loading option in the SP tool. Then you will get the new tab of SP Tool which you ask the location of the scatter file on your PC. Now select the “MT6735M_Android_scatter.txt” file. See in this image.
Step 4: You can see RECOVERY already selected and SP Tool show these file location. Now click on Download option in the Sp Tool, then connect your switch off phone with PC via USB cable (Make sure your phone is switched off).
Step 5: SP Tool detect your phone and process will start. If Sptool is not recognize or detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it)
Note: – Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.
Step 6: After the process complete, a green ring will appear.
Step 7: Disconnect your phone. Do not start your phone. Press and hold vol. up & down + power button then select “recovery mode” (If your touch not work then use volume up and down key for menu up and down and Power button as a enter button)
Step 8. Click on install button/ choose install and select “SuperSU.zip”file from your save location on your SD card and install this file. Now reboot your phone. .
This is simple and easy root Coolpad Note 3 and install TWRP recovery guide for your device. I can try to make it easy and make all steps clear to understand and try to make image all step for you. If your feel any problem then please comment us. I try to best resolve your problem.
Note: I am not responsible if you make Mistakes and Bricked Devices.