Hi, This is a tutorial of root Micromax A115 Canvas 3D and install CWM or TWRP recovery. In this guide you will find all steps with image, therefore it is safe and easy method of root Micromax A115 Canvas 3D and install CWM or TWRP recovery. Micromax A115 Canvas 3D has 1.2GHz dual core processor along with 512MB RAM and 4GB ROM.
This phone has 5 inches IPS screen size with 1280*720 pixels. This phone has 5 mega pixels rear camera with LED flash and VGA fixed focus front camera in new Micromax A115 Canvas 3D. Micromax A115 Canvas 3D is great phone and you must be root Micromax A115 Canvas 3D because root allows for you to use a maximum of your phone without any restrictions. After root you will install custom Rom, apps, and setting in your phone. But before root you must read Root Advantage and Disadvantage by this post. Then after follow these steps to root your phone.
Preparation of flash/update:
1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Read all steps then do it careful.
4. Make sure proper power backup of your PC.
|File Name||Download link|
|Micromax A115 Canvas 3D Scatter file||Download|
|SP-Tool v3.1244.0.sn85 for Micromax A115||Download|
|Driver for Micromax A115 Canvas 3D||Download|
|TWRP Recovery for Micromax A115 Canvas 3D||Download|
|CWM Recovery for Micromax A115 Canvas 3D||Download|
|SuperSU Zip for Micromax A115 Canvas 3D||Download|
How to Root Micromax A115 Canvas 3D and install CWM or TWRP recovery:
Step 1: Install drivers in your PC (If you feel any problem in install driver then watch this video Click here) and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.
Step 2: Download SuperSU file and copy in your phone memory card. Now Download CWM recovery and scatter file of your phone and extract these file in a folder where you want. Extract and open the SP Tool. Sptool.exe Run as Administrator.
Step 3: You will see an SP tool window, now click on the scatter-Loading option in the SP tool. Then you will get the new tab of SP Tool which you ask the location of the scatter file on your PC. Now select the “Android_scatter_emmc.txt” file. See in this image.
Step 4: Now connect your switch off phone with PC via USB cable (Make sure your phone is switched off).
Step 5: SP Tool detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it)
Step 6: Now start installing recovery in your phone by flashing.
Note: – Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.
Step 7: After the process complete, a green ring will appear.
Step 8: Disconnect your phone.
Step 9: Do not start your phone. Press and hold vol. up & down + power button then select “recovery mode” (If your touch not work then use volume up and down key for menu up and down and Power button as a enter button)
Step 10. Click on install button/ choose install and select SuperSU.zip file from your save location on your SD card and install this file. Now reboot your phone.
If you feel any problem then watch this video click here.
This is simple and easy root Micromax A115 Canvas 3D and install CWM or TWRP recovery guide for your device. I can try to make it easy and make all steps clear to understand and try to make image all step for you. If your feel any problem then please comment us. I try to best resolve your problem.
Note: I am not responsible if you make Mistakes and Bricked Devices.