New update of Micromax canvas 4 A210 Stock Rom V3

This is new official stock Rom update of Micromax canvas 4 A210 Stock Rom V3. This is second update of Micromax Canvas 4 V3 by Micromax. What’s new in this Rom we will tell you soon, So stay with us. This phone has ultimate features like Aluminum body as an antenna to improve call quality,  blow air on the screen or shake phone to unlock phone, Pin any video to the screen & multitask seamlessly between applications and most important with the ‘look away’ feature that pauses a video being played as soon as you look away from the screen.

Must read: Microsoft launch free Office suite app for Android and iOS

Canvas 4 has Android 4.2 Jelly Bean, Mediatek 6589 Processor 1.2 GHz Quad-Core, RAM 1 GB, Rear Camera 13 MP and Front Camera 5 MP, Display 5 inch, 1920 x 1080, In-Built Storage 8 GB and Battery 2500 mAh. It is outstanding phone. This phone get second  V3 Stock Rom, Previous update is Stock Rom V2 .

New-update-of-Micromax-canvas-4

Preparation of flash or update:

1.  Take a backup of your phone Click here.
2. Take a backup of your IMEI no. by mobile uncle tool Click here.
3. Your phone battery should charge 80% minimum.4. Make sure proper power backup of your PC.5. Read all steps then do it careful.

Download ROM and Tools of Micromax canvas 4 A210:

File NameDownload link
Micromax canvas 4 A210 Stock Rom V3Download
Micromax canvas 4 A210 SP Tool V5.1352Download
Micromax canvas 4 A210 USB DriverDownload

Steps for New update of Micromax canvas 4 A210 Stock Rom V3:

Step 1: Install drivers in your PC (If you feel any problem in install driver then watch this video Click here)  and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.

Enable-debugging

Step 2:  Extract the Stock ROM folder where you wantSP-Tool

Step 3: Extract and open the SP Tool. Sptool.exe Run as Administrator
Step 4: Click on Scatter-Loading option.

Scatter-Loading

Step 5: SpTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is our scatter file.

scatter-emmc-txt

Step 6: Now click on Download.

SP-tool-Download

Step 7: Connect your switch off phone with PC via USB cable  (Make sure your phone is switched off).

Connect

Step 8: SP Tool detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here  (Driver already in phone flash drive if you don’t have these drivers then install it)

Sp-tool-process

Step 9: Now start downloading Stock Rom in your phone by flashing

start-downloading

Note: – Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 10:  After the process complete, a green ring will appear.

process-complete

Step 11: Disconnect your phone. Now your phone is updated. If you feel any problem of flashing or update your phone then watch this video click here.

Must read: Tips of Hidden Secret Codes For Your Android Mobile

After update you can root Canvas 4 because root gives us a power to use maximum of your phone without any restrictions. After root you will install custom Rom, custom setting and apps in your phone. We already discuss on Root Advantage and Disadvantage by earlier post. So we need to know “How to root and install CWM Recovery in Canvas 4 A210 and if you want root only then read this post  How to Root Micromax A210 Canvas 4”.

Previous update of Canvas 4 :

Micromax Canvas 4 Stock Rom V1
Micromax Canvas 4 Stock Rom V2

Note: I am not responsible if you make Mistakes and Bricked Devices.

38 response on “New update of Micromax canvas 4 A210 Stock Rom V3

  1. Smiet

    Hi,
    I my ROM download download failed at 25%. Now my phone won’t even start. What should my next step?
    Will my phone work again or I have to buy a new one?

    Reply
  2. Brijesh

    Hello admin ji & every user of Micromax Canvas 4 or other phones. If you want to flash any Rom on your device and you are not able to do so bcoz when you Connect your battery removed phone to your Pc and you get continuous connection-disconnection in which your phone gets connected and then diconnected and then again connected and disconnected automatically so on in this manner( i call it “Blinking USB connection”).. So dont worry I now I have got a solution for you…
    If you want to flash Rom on your device if it gets bricked or any other reason and not able to do so bcoz you are worried that your phone will get corrupted due to continuous disconnection. Then dont worry..

    The solution is that when you Use Sp flash tool and click on download button and then connect your phone with USb cable,
    Before doing so, enable the option of ‘DA DL ALL with checksum’ in Sp flash tool.

    When you do so and then click on download button, your sp tool will start flashing software to your device without any interruption. Ya thats it!!!
    And during the software flashing you can now also see in ‘Devices and Printers’ or ‘Device Manager’ that your device is continuously connected to the computer.

    If your problem is also solved then plz let me know in comments..

    Reply
  3. Brijesh

    i am using windows 7.
    I downloaded this video and followed the instructions and the driver got installed succesfully.
    But still the same problem of Blinking USB connection

    Like in “Devices and Printers” , The “Device Manager” keeps refreshing every 1-2 seconds infinitely, and actually it is very difficult to update the driver also , we have to right click the preloder driver in very much speed otherwise it goes off due to refreshing (or like removal and then agin connecting of pendrive). But i managed to update the driver and it was also updated successfully.

    But..
    In your video tutorial, your mobile device comes in “other devices” section of Device manager, and it also shows a yellow icon.
    but in my pc, my Canvas 4’s driver shows in the “Ports” section of device manager. Means we have to expand the ‘Ports’ section to view our device and there is no yellow icon on it.
    So it means this problem is not with the driver,ie. my Android device can work with any driver whether it is Mobistel cygnus, or Micromax Preloader, or MT65xx Preloader , or Vcom driver(Whose name is actually “Mediatek Preloader USB VCOM Port”. But the real problem i think is the (Interrupting / or Blinking) connection

    I read many comments in many pages of this website, all the users of Micromax Canvas 4 A210 are saying that their device Connects and then Disconnects, which looks similar to The Problem I am getting..

    Reply
  4. Brijesh Rana

    Hi sir, The problem is that when I connect my phone to Laptop via USB, (without battery) then it Connects for about 1 sec and then itself disconnects for 1 sec , and then again connect-disconnect in the same duration for infinite times.
    I can see the device connect/disconnect in the “Devices and Printers” which we can open by Start menu and also hear its connect-disconnect sounds.
    It is like we connect usb pendrive to Computer, remove it from the computer, reconnect it and so on….
    but in real the usb cable is continuous connected to the PC.

    I call this problem as- “Blinking USB Connection” as it is like we connect usb pendrive to Computer, remove it from the computer, reconnect it and so on…. the connection is like Blinking of Light, but not actually blinking of light but like connect& removal of Pendrive.

    Now when i tried meta mode -(https://www.skyneel.com/if-your-mobile-not-detect-by-pc-or-sptool-use-meta-mode)—

    On the first time when I continusly pressed the volume up button and connect to PC, then in Devices and printers I can see that there is no “Blinking USB connection” and my device is not detected.(I connected the usb to the PC sevral times by this way and no device was there all times)

    then i decided to do this Meta technique(by vol+ butt.) in Sp tool. So I pressed Download button in Sp Flash tools and connect my Canvas 4 with vol+ button continuously, but SP flash tool didn’t detect my Device and it did nothing.

    Then I removed USB cable with Canvas 4 from the computer.
    Now this time, When I again connected USB with to PC by Meta mode(pressing vol +) then there My device was detected but the connection was “Blinking USB connection”

    Again i removed usb from the computer, connect it, and i done this connect-removal many times, and all that times it was a- “Blinking USB connection”

    So i do not understood that either my vol up button had now become useless or the PC had this problem after pressing download button in sptool in My phone in Meta mode.

    In The Stock Rom V16 for Canvas 4 A210, it contains the software – “Maui META 3G ver 6.1308.0” in its own folder. So I installed this software on my Windows Laptop. Is this Maui Meta software has to be neccesary to do anything with Meta mode( pressing Vol+ button on Device connect to PC) ?

    Also i couln’t install Vom driver by right clinking its .inf file. It says that- “The INF file you selected does not support this type of installation”

    I am writing all this from Laptop pc as my Canvas 4 is still bricked up.
    Please help me with all this problem..

    Reply
    1. Abhishek Sharma Post author

      Hi Brijesh Rana

      Install vcom driver, watch this video to know, how to install vocm driver click here and try to flash in normal mode via sptool.

      And tell me, which Windows version you are using on your Laptop?

      Reply
  5. Brijesh

    PLZ help me sir. My phone is bricked up. It only boots till micromax animation on booting, and then nothing happens.i have been into recovery mode and restored the earlier bakup, and also cleared wipe cache clean, but that did nothing. plz help me sir,..

    Reply
      1. Brijesh

        Please I want to know that, in your website there are given three Stock Rom version for canvas 4- V1, V3, & V16, I should install which one, which is bug free?
        and when i connect my phone by USB thhen in “Devices and Printers” I can see that It(mt 65xx) connects and disconnects and agains itself connects and this process continue,and so due to this, I think it can permanently ‘hard brick’ my device and Then the “Stock Revovery” will also become corrupted and phone will become dead .
        …please give me solution

        Reply
  6. amit

    i am using stock rom v3 and wifi doesnt work properly it connects and disconnects also range of wifi becomes very poor…please give me any solution

    Reply
  7. Nitish Kaushik

    Framaroot can be used to root this device. it worked for me.
    somehow my camera was bugged by flashing some wrong rom, since then i've tried various patches stock roms everything but all I get is "can't connect to camera".
    Any advice ?

    Reply
    1. Abhishek Sharma Post author

      Hi Nitish

      Now Micromax work on Android 4.2.4 or 4.4, So We will hope to micromax release new update soon.

      My suggestion : if you feel any problem with this Micromax update then Go to Back on V2 Rom click here

      Reply
  8. rupesh

    hello sir I just flashed the StockromV3 for canvas 4,And the first problem is that The old method of rooting Canvas 4 i not working after installing V3 rom

    Reply
    1. Abhishek Sharma Post author

      Hi Rupesh

      Fist i tell you don't copy any thing from my blog because all content is copyrighted for skyneel.com. So please delete my content from your blog. If you don't delete them then i am file DMCA against you.

      I will give you new root method for your Canvas 4 v3

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *