New lollipop update Micromax Q424 Bolt Selfie Stock Rom V2

Hi, This is an officially approved new update of Micromax Q424 Bolt Selfie Stock Rom V2. And here is an easy and safe guide to install new lollipop update Micromax Q424 Bolt Selfie Stock Rom V2.

Micromax Q424 Bolt Selfie comes with 4.5-inch LCD display which provides 854 x 480 pixels resolution. The Micromax Q424 Bolt Selfie is running on the Android 5.1 Android Lollipop operating system. Micromax Q424 Bolt Selfie powered by 1.3 GHz Quad-Core with Mediatek MT6735 Chipset.

Preparation of flash or update:

1. Take a backup of your phone by this guide.
2. Your phone battery should charge 80% minimum.
3. Make sure proper power backup of your PC.

Must Read: How to add recycle bin feature on Android phone

Download ROM and Tools of Micromax Q424 Bolt Selfie :

File NameDownload link
Micromax Q424 Bolt Selfie Stock Rom V2Download
Micromax Q424 Bolt Selfie SP Tool V5.1612Download
Micromax Q424 Bolt Selfie USB DriverDownload

How to install new lollipop update Micromax Q424 Bolt Selfie Stock Rom V2:

Step 1: Install drivers on your PC (If you feel any problem in install driver then watch this video) and Enable Developer Mode and USB Debugging on your Phone by this guide. After then switch off your phone.

Enable Developer Mode and USB Debugging on Micromax Q424 Bolt Selfie

Step 2: Extract Stock ROM and SP Tool folder, where you want to save. Open the SP Tool and run Sptool.exe as Administrator.

Run SP tool as Administrator for Micromax Q424 Bolt Selfie

Step 3: Click on Scatter-Loading option. SP Tool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.

Load Scatter file by Scatter loading option for Micromax Q424 Bolt Selfie

Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).

Click Download in the SP tool for download ROM onMicromax Q424 Bolt Selfie

Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize or detect your phone then install vcom driver. After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flashing guide.

Finish flashing process of Micromax Q424 Bolt Selfie

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone. If you feel any problem of flashing or update your phone then watch this video.

Must Read: Easy ways to prevent Android phone with malware

Tips for Micromax Q424 Bolt Selfie:

After install new lollipop update Micromax Q424 Bolt Selfie Stock Rom V2, you can root your phone because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, Rom and custom setting in your phone. But first read Root Advantage and Disadvantage, then root Micromax Q424 Bolt Selfie.

Previous update of Micromax Q424 Bolt Selfie Stock Rom V1.

I hope you like this new lollipop update Micromax Q424 Bolt Selfie Stock Rom V2 installation guide from which you will be able to easily new lollipop update Micromax Q424 Bolt Selfie Stock Rom V2 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

Leave a Reply

Your email address will not be published. Required fields are marked *