Hi, This is first Approved new Lollipop update Karbonn Titanium S19 Stock Rom V2 and here is a easy and safe tutorial to install Lollipop update Titanium S19 Stock Rom V2. Karbonn Titanium S19comes with 5.0-inch IPS LCD display which provides 720 x 1280 pixels resolution. The Karbonn Titanium S19 is running on the Android 4.4 Android Kitkat operating system. Karbonn Titanium S19 powered by 1.3 GHz Quad-Core with 1 GB RAM.
Preparation of flash or update:
1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Read all steps then do it careful.
4. Make sure proper power backup of your PC.
Must Read: Important tips to boost up Android phone
Download ROM and Tools of Karbonn Titanium S19:
|File Name||Download link|
|Karbonn Titanium S19 Stock Rom V2 Lollipop||Download|
|Karbonn Titanium S19 SP Tool V5.1616||Download|
|Karbonn Titanium S19 USB Driver||Download|
How to install new Lollipop update Titanium S19 Stock Rom V2:
Step 1: Install drivers on your PC and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.
Step 2: Extract Stock ROM and SP Tool folder, where you want. Open the SP Tool and run Sptool.exe as Administrator.
Step 3: Click on Scatter-Loading option. SPTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.
Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).
Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it). After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flash guide click here.
Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.
Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone.
Must Read: Google Chrome secret tips and tricks 2016
I hope you like this new Lollipop update Titanium S19 Stock Rom V2 installation guide from which you will be able to easily install new Lollipop update Karbonn Titanium S19 Stock Rom V2 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.
Note: I am not responsible if you make Mistakes and Bricked Devices.