Hi, today we talk about how to flash or Install Stock Rom v1 of Micromax a210 Canvas 4. This is first Rom of Micromax Canvas 4 v1 by Micromax. This phone has ultimate features like The Aluminum body as an antenna to improve call quality, blow air on the screen or shake phone to unlock phone, Pin any video to the screen & multitask seamlessly between applications and most important with the ‘look away’ feature that pauses a video being played as soon as you look away from the screen!
Canvas 4 has Android 4.2 Jelly Bean, Mediatek 6589 Processor 1.2 GHz Quad-Core, RAM 1 GB, Rear Camera 13 MP and Front Camera 5 MP, Display 5 inch, 1920 x 1080, In-Built Storage 8 GB and Battery 2500 mAh. It is outstanding phone. It is easy to install V1 Rom in Canvas 4.
Preparation of flash or update:
1. Take a backup of your phone Click here.
2. Take a backup of your IMEI no. by mobileuncle tool Click here.
3. Your phone battery should charge 80% minimum.
4. Make sure proper power backup of your PC and Read all steps then do it careful.
Download ROM and Tools of Micromax A210 Canvas 4:
|File Name||Download link|
|Micromax A210 Canvas 4 stock Rom V1 part-1||Download|
|Micromax A210 Canvas 4 stock Rom V1 part-2||Download|
|Micromax A210 Canvas 4 SP Tool v3.1312.0.139||Download|
|Micromax A210 Canvas 4 USB Driver||Download|
Easy steps to Install Stock Rom v1 of Micromax a210 Canvas 4:
Step 1: Install drivers in your PC (If you feel any problem in install driver then watch this video Click here) and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.
Step 2: Extract the Stock ROM folder where you want then Extract and open the SP Tool. and run Sptool.exe Run as Administrator
Step 3: You will see an SP tool window, now click on the scatter-Loading option in the SP tool. Then you will get the new tab of SP Tool which you ask the location of the scatter file on your PC. You will find this scatter file in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt”. See in this image.
Step 4: Now You will see two options for flashing Rom, first is “firmware upgrade” option which is used to update or flash your Rom without deleting your data and second one is “Download” option this is work for format your phone then flash Stock Rom ( like fresh Rom installation). So choose according to your requirement and I suggest, click on the “Download” option and flash fresh Rom on your phone.
Step 5: Now connect your switch off phone to the PC via USB cable (Make sure your phone is switched off). SP Tool detect your phone and process will start. See in below image. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it)
Step 6: Now Sptool start downloading Stock Rom in your phone by flashing.
Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.
Step 7: After the process complete, a green ring will appear.
Step 8: Disconnect your phone. Now your phone is updated. If you feel any problem of flashing or update your phone then watch this video click here.
After update you can root Canvas 4 because root allows for you to use a maximum of your phone without any restrictions.After root you will install custom apps, custom Rom and custom setting in your phone. We already discuss on Root Advantage and Disadvantage by earlier post. So we need to know “How to root and install CWM Recovery in Canvas 4 A210 and if you want root only then read this post How to Root Micromax A210 Canvas 4”.
Note: I am not responsible if you make Mistakes and Bricked Devices.