Micromax has released new update of Micromax A110. This is Stock Rom V2 But not announce officially because Micromax didn’t have OTA Update features. So if you want update without suffering with service center, follow these steps at your home and update your phone easily.
In this update Micromax integrated with M! Zone+ and M! Live apps and Browser homepage is replaced with http://mimicromax.com. Micromax has fixed Dial pad issue in this update. This update has calibrated battery, GPS fixed and Wi-Fi boosted. The most important feature brings in this update that Micromax increased internal memory from internal storage and now it is increased 512MB to 1GB. This update add 1GB to internal storage for apps installation and 1.48 GB for Internal SD for user data.
Preparation of flash or update:
1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Make sure proper power backup of your PC.
4. Read all steps then do it careful.
Download ROM and Tools of Micromax A110 Canvas 2:
|File Name||Download link|
|Micromax A110 Canvas 2 Stock Rom V2||Download|
|Micromax A110 Canvas 2 SP Tool v3.1220.01||Download|
|Micromax A110 Canvas 2 USB Driver||Download|
How to flash or update Micromax A110 Stock Rom V2:
Step 1: Install drivers in your PC (If you feel any problem in install driver then watch this video Click here) and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.
Step 2: Extract the Stock ROM folder where you want then Extract and open the SP Tool. and run Sptool.exe Run as Administrator
Step 3: You will see an SP tool window, now click on the scatter-Loading option in the SP tool. Then you will get the new tab of SP Tool which you ask the location of the scatter file on your PC. You will find this scatter file in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt”. See in this image.
Step 4: Now You will see two options for flashing Rom, first is “firmware upgrade” option which is used to update or flash your Rom without deleting your data and second one is “Download” option this is work for format your phone then flash Stock Rom ( like fresh Rom installation). So choose according to your requirement and I suggest, click on the “Download” option and flash fresh Rom on your phone.
Step 5: Now connect your switch off phone to the PC via USB cable (Make sure your phone is switched off). SP Tool detect your phone and process will start. See in below image. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here (Driver already in phone flash drive if you don’t have these drivers then install it)
Step 6: Now Sptool start downloading Stock Rom in your phone by flashing.
Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.
Step 7: After the process complete, a green ring will appear.
Step 8: Disconnect your phone. Now your phone is updated. If you feel any problem of flashing or update your phone then watch this video click here.
After update you can root your Canvas 4 because root gives us a power to use maximum of your phone without any restrictions. After root you will install custom Rom, custom setting and apps in your phone. but first you read Root Advantage and Disadvantage then follow these Root guide “How to Root Micromax A110”.
New update of Canvas 2 Micromax A110
Micromax A110 Jelly Bean Stock Rom V3