How to install Xiaomi Redmi Note 3G Stock Rom MIUI 6

Hi this first approved ROM of Xiaomi Redmi Note 3G Stock Rom MIUI 6 and here is a easy and safe tutorial of this update processes. It is Stock Rom MIUI 6 of Xiaomi Redmi Note 3G. Xiaomi Redmi Note 3G has 1.7GHz Octa core processor along with 2GB RAM and 8GB ROM. This phone has 5.5 inches IPS screen size with 1280*720 pixels. This phone has 13 mega pixels rear camera with LED flash and 5MP front camera in Xiaomi Redmi Note 3G. After reading this article you will be able to get the answer of your question how to install MIUI 6 on Xiaomi Redmi Note 3G.

Preparation of flash or update:

1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Read all steps then do it careful.
4. Make sure proper power backup of your PC.

Must Read: How to fix charging problem in the Smartphone

Download ROM and Tools of Xiaomi Redmi Note 3G:

FILE NAMEDOWNLOAD LINK
Xiaomi Redmi Note 3G Stock Rom MIUI 6Download
Xiaomi Redmi Note 3G SP Tool V5.1352Download
Xiaomi Redmi Note 3G USB DriverDownload

How to install of Xiaomi Redmi Note 3G Stock Rom MIUI 6 :

Step 1: Install drivers on your PC (If you feel any problem in install driver then watch this video click here)  and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this click here). After then switch off your phone.

Enable-USB-Debugging

Step 2: Extract Stock ROM and SP Tool folder, where you want. Open the SP Tool and run Sptool.exe as Administrator.
Run-SP-Tool

Step 3: Click on Scatter-Loading option. SPTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “MT6592_Android_scatter.txt” which is your stock Rom scatter file.
Click-on-Scatter-Loading-option

Step 4: Now Select firmware upgrade from dropdown menu then click on Download. And Connect your switch off phone with The PC via USB cable  (Make sure your phone is switched off).click-on-Download

Step 5: SP Tool auto-detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here  (Driver already in phone flash drive if you don’t have these drivers then install it). After install Vcom driver connect your switched off phone with the PC. If you phone again not recognized by your SP Tool then try to flash via Meta mode flashing process, here is Meta-Mode flash guide click here.
process-complete-green-ring-will-appear

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone. If you feel any problem of flashing or update your phone then watch this video click here.

Must Read: How to remove or disable bloatware on Android device without Root

After install new update of Redmi Note 3G, you can root your phone because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, Rom and custom setting in your phone. But first read Root Advantage and Disadvantage by this article, then here is a root guide: How to root Xiaomi Redmi Note 3G MIUI 6.

I hope you like this Xiaomi Redmi Note 3G Stock Rom MIUI 6 installation guide from which you will be able to easily install Xiaomi Redmi Note 3G Stock Rom MIUI 6 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

Leave a Reply

Your email address will not be published. Required fields are marked *