Install Micromax A110 Jelly Bean V4 1.11 on Qmobile A10 and A919 Duo

This is fourth update of Micromax A110 Jelly Bean V4 1.11 Jelly Bean update and your can find easy and simple guide to Install Micromax A110 Jelly Bean V4 1.11 on Qmobile A10 & A919 Duo. Micromax A110 is superb phone and first popular phone from Micromax side. It has 1GHz Dual core processor with MT6577 chipset. Canvas 2 has 512MB RAM and 4GB Rom with 4.1.1 Android Jelly Bean.

Micromax A110 has 5MP rear camera and 0.3MP front camera for video chat. This is fourth update of canvas 2 Stock Rom V4 Jelly Bean Now update your phone with Jelly bean, it is working on Micromax A110, Qmobile A10 and A919 Duo.

Must Read: How to improve Android Smartphone battery life with 7 tips

Preparation of flash or update:

1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Make sure proper power backup of your PC.
4. Read all steps then do it careful.

Download ROM and Tools of Micromax A110 Canvas 2:

File NameDownload link
Micromax A110 Canvas 2 Stock Rom V4 1.11Download
Micromax A110 Canvas 2 SP Tool v3.1220Download
Micromax A110 Canvas 2 USB DriverDownload

How to Install Micromax A110 Jelly Bean V4 1.11 Qmobile A10 and A919 Duo:

Step 1: Install drivers in your PC (If you feel any problem in install driver then watch this video Click here) and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.

Enable-debugging

Step 2:  Extract the Stock ROM folder where you want then Extract and open the SP Tool. and run Sptool.exe Run as Administrator

SP-Tool

Step 3: You will see an SP tool window, now click on the scatter-Loading option in the SP tool. Then you will get the new tab of SP Tool which you ask the location of the scatter file on your PC. You will find this scatter file in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt”. See in this image.

Flashing-process

Step 4:  Now You will see two options for flashing Rom, first is “firmware upgrade” option which is used to update or flash your Rom without deleting your data and second one is “Download” option this is work for format your phone then flash Stock Rom ( like fresh Rom installation). So choose according to your requirement and I suggest, click on the “Download” option and flash fresh Rom on your phone.

Step 5: Now connect your switch off phone to the PC via USB cable  (Make sure your phone is switched off). SP Tool detect your phone and process will start. See in blow image. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here  (Driver already in phone flash drive if you don’t have these drivers then install it)

Sp-tool-process

Step 6: Now Sptool start downloading Stock Rom in your phone by flashing.

start-downloading

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 7:  After the process complete, a green ring will appear.

process-complete

Step 8: Disconnect your phone. Now your phone is updated. If you feel any problem of flashing or update your phone then watch this video click here.

Must Read: How to recover deleted chat lines in WhatsApp

After install Micromax A110 Jelly Bean V4 update on your phone, you can root your phone, because root allows for you to use a maximum of your phone without any restrictions. After root you will install custom apps, custom Rom and custom setting in your phone. We already discuss on Root Advantage and Disadvantage by earlier post and we already saw “How to Root Micromax A110 Canvas 2 ” in earlier post.

Note: Read carefully then do these steps. It is tested then post, I am not responsible for any loss.

11 response on “Install Micromax A110 Jelly Bean V4 1.11 on Qmobile A10 and A919 Duo

  1. ROHIT SAHA

    But when I press and hole vol. up+down and power button in same and when I press recovery option then show a android and loading and restart.I cannot open recover mod options….plz help

    Reply
    1. Abhishek Sharma Post author

      hi rohit

      remove you battery
      after same time put it again
      then press and Hold vol. up+down and power button in same
      then you will get two option press up key and go to recovery option

      more information to read this post click Here

      Reply
  2. Anup Rode

    After v3 update i got new updated Youtube app but i want to install old youtube app in v2 rom.
    its system app so i m unable install old youtube app plz help

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *