How to install Micromax A091 Canvas Engage Stock Rom V1

Hi, This is first approved Micromax A091 Canvas Engage Stock Rom V1 by Micromax. You can get Stock Rom V1 of A105 Canvas Entice and flashing or updating guide by this post.

In this flash/update guide you will find all steps with image, therefore it is safe and easy method of flash Stock Rom on your Canvas Entice. Micromax A091 Canvas Engage is powered by Quad-core 1.2 GHz Processor with Broadcom BCM23550 chipset and 4-inch IPS LCD capacitive touchscreen with 400×800 pixels Resolution with 16M colors. Micromax Canvas Entice has accelerometer and proximity sensors. Canvas Entice run on an Android OS, v4.4.2 (Kitkat) and it has 512MB RAM and 4GB internal storage.

Make some preparation of flash or update for your phone safety:

1. First of all take a backup of your phone, here is guide Click here.
2. Your phone battery should charge 80% minimum.
3. Make proper power backup of your PC.

Must Read: How to Convert Android Smartphone as a Webcam

Download ROM and Tools of Micromax A091 Canvas Engage:

File NameDownload link
Micromax A091 Canvas Engage Stock Rom V1Download
Micromax A091 Canvas Engage DFU Flashing ToolDownload
Micromax A091 Canvas Engage USB DriverDownload

How to update or install Micromax A091 Canvas Engage Stock Rom V1:

Step 1: Install drivers on your PC (If you feel any problem in install driver then watch this video Click here)  and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.
Enable-debuggingStep 2: Download and extract your Stock ROM and DFU Flashing Tool folder, where you want. Open the DFU Tool and run dfu.exe as Administrator.Extract-Stock-ROM-DFU-Flashing-Tool
Step 3: When you open the dfu tool then by default open setting tab in the dfu flashing window. See in the below image. Now click on the Browse button and select Stock Rom folder from where you extract your Rom.
Step 4: You can see your Stock Rom content in dfu tool (Download Flashing Utility). Now Click on Download Tab.
Step 5: Now you can see a big green start button in your dfu tool. Click on this start button and connect your switch off phone and press volume Up and Down key.
Step 6: Download flashing tool (dfu) detect your phone automatically and process will start. When flashing process will complete then you will get a massage for successfully complete flashing. Now disconnect your updated phone.

After install Micromax A091 Canvas Engage Stock Rom V1, you can root your phone because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, Rom and custom setting in your phone. But first read Root Advantage and Disadvantage by this article, then here is a root guide: How to root Micromax A091 Canvas Engage without PC.

Must Read: How to unlock pin pattern lock password on Android device

I hope you like this Micromax A091 Canvas Engage Stock Rom V1 installation guide from which you will be able to easily install Micromax A091 Canvas Engage Stock Rom V1 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: I am not responsible if you make Mistakes and Bricked Devices.

one response on “How to install Micromax A091 Canvas Engage Stock Rom V1

Leave a Reply

Your email address will not be published. Required fields are marked *