How to update Micromax A110 with official Jelly Bean V3 1.10

A simple tutorial to update Micromax A110 Canvas 2 with official Jelly Bean V3 stock Rom V3 1.10. upgraded OS ICS to Jelly bean.

Micromax release new update stock Rom V3 1.10 of Micromax  A110 Canvas 2. In this official Jelly Bean V3 1.10 and update Operating system is upgraded from ICS to Jelly bean. Micromax will release Android 4.4 KitKat update for Micromax Canvas 2 soon.

Micromax A110 is superb phone and first popular phone from Micromax side. It has 1GHz Dual core processor with MT6577 chipset. Canvas 2 has 512MB RAM and 4GB Rom with Android 4.1.1 Jelly Bean. It has 5MP rear camera and 0.3MP front camera for video chat.  This is third update of canvas 2 stock Rom V3 Jelly Bean, previous update was Stock Rom V2 ICS 4.0.4. Now this update your phone with Jelly bean.

Must Read: How to improve Android Smartphone battery life with 7 tips

Preparation of flash or update:

1. Take a backup of your phone Click here.
2. Your phone battery should charge 80% minimum.
3. Make sure proper power backup of your PC.
4. Read all steps then do it careful.

Download ROM and Tools of Micromax A110 Canvas 2:

File Name Download link
Micromax A110 Canvas 2 Stock Rom V3 Download
Micromax A110 Canvas 2 SP Tool v3.1220 Download
Micromax A110 Canvas 2 USB Driver Download

Steps to update Micromax A110 Canvas 2 with official Jelly Bean V3:

Step 1: Install drivers in your PC (If you feel any problem in install driver and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.

Enable-debugging

Step 2:  Extract the Stock ROM folder where you want then Extract and open the SP Tool. and run Sptool.exe Run as Administrator

SP-Tool

Step 3: You will see an SP tool window, now click on the scatter-Loading option in the SP tool. Then you will get the new tab of SP Tool which you ask the location of the scatter file on your PC. You will find this scatter file in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt”. See in this image.

Flashing-process

Step 4:  Now You will see two options for flashing Rom, first is “firmware upgrade” option which is used to update or flash your Rom without deleting your data and second one is “Download” option this is work for format your phone then flash Stock Rom ( like fresh Rom installation). So choose according to your requirement and I suggest, click on the “Download” option and flash fresh Rom on your phone.

Step 5: Now connect your switch off phone to the PC via USB cable  (Make sure your phone is switched off). SP Tool detect your phone and process will start. See in below image. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you click here  (Driver already in phone flash drive if you don’t have these drivers then install it)

Sp-tool-process

Step 6: Now Sptool start downloading Stock Rom in your phone by flashing.

start-downloading

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 7:  After the process complete, a green ring will appear.

process-complete

Step 8: Disconnect your phone. Now your phone is updated.

Must Read: How to recover deleted chat lines in WhatsApp

After update official Jelly Bean V3, you can Root Canvas 2 because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, custom Rom and custom setting in your phone. We already discuss on Root Advantage and Disadvantage by earlier post and we already saw “How to Root Micromax A110 Canvas 2” in earlier post.

Some useful guide of Micromax A110 Canvas 2:

I hope you like this new update Micromax A110 with official Jelly Bean V3 1.10 installation guide from which you will be able to easily install new update Micromax A110 with official Jelly Bean V3 1.10 without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.

Note: Read carefully then do these steps. It is tested then post, I am not responsible for any loss.

233 Comments

    1. thanks i tried enroll the imei no as u show in ur previous post .now both the sim are working fine. thank you so much.

    1. Hi Harsh

      If Micromax release Jelly bean for Micromax Ninja A89 then i will defiantly provide guide. Please wait

  1. Hi Abhishek,
    I have upgraded my mobile to Cynus T2 jellyBean. But i am not satisfied with my mobile camera as well as the performance. Its slow. How can i reset my update back to the original one.

    Thanks in advance
    Balaji

    1. Hi

      Flash V3 Rom on your mobile by Sptool. If your set your camera 12MP to 8 MP and sharpness set on high then your camera work prefect. And you can use 4.4 kitkat camera app, it is work very nice on Micromax A110 click here

  2. hi abhishek,yester day i had updated 4.2.1 on my canvas A116 HD ,but after updating my sims are not detecting and sim management is disabled.
    can u sort out this ya

    1. If your have signal problem from this Rom then replace your old modem.img to new os Micromax Jelly Bean

      here is guide : –
      open root explorer go to system folder
      replace System/etc/firmware/modem.img and set permission wr-r-r
      Reboot..

  3. i clicked "Download" after following the procedure. the device is not getting detected after i switch off and plug my micromax a110 (i have installed devices already).

  4. Dear Abhishek
    My mm a 110 is still on pics.Could I flash jelly bean 3 directly on it? I mean without going through jb versions 1 and 2.please be kind enough to let me know by sending me an email.

    [email protected]

  5. usb searching on my sp tool but not detect my phone….
    remove bettry and again try to connect …but not searching
    usb remove and connect but not searching my phone sp tool

  6. hi
    problem with wifi is still not solve ,before it was on 4.0.4 version and wifi was working perfect ,flash with 4.1.1 with just download click option .can i have your nos to discus problm or pls give any good sloution to solve my problem

  7. After update, I've problem with wifi and internet.
    Even if wifi is connected or data connection is on, wifi signals are not showing up. Also cannot cannot open play store or Google…

    1. reflash Rom again

      note :- click on download button, not click firmware update button

    1. this is solution of sim issue

      if this issue created by your Rom then it will resolve

  8. hey abhishek plz tell me how to fix gps location issue in mah micromax canvas 2 plus a110q ……….. i m waiting for your reply

  9. i am facing other problem ,i have ICS, my phone doesnot charge when switched on , it charges only when swithced off
    Any solution of this

    1. it is not hardware problem
      it is Rom Error

      so update with jelly bean or reinstall ICS

      i thing solve your problem after installation

  10. i am following the above steps, i have windows 7, but the phone just stuck 0% and searching
    All drivers are properly installed, it just start charging.
    Please provide me the solution

    1. after charging disconnect your phone
      remove battery 5 min then put it again
      and connect your phone ( before connect your phone you must click on download option )

      do it

      good day

    2. done that and now Jelly Bean Thanx
      NOw i just want to know i have taken my contacts and sms backup in SuperBackup App , but now i am unable to restore them
      How can i restore

    3. install SuperBackup App then restore your contacts and sms
      if app didn't find your backup then give manually path

  11. after updating jb on my canvas 2 is it required to root it?? if yes then why??? rply me…plzz

  12. hello, in some of the videos they click on update on sptools for updating canvas 2 & in some of the videos they click on the download botton on sp tools. which sould i follow??? & after updating jb on my canvas 2 is it required to root it?? if yes then why??? rply me…plzz

    1. Update :- not full format your phone & update your file system

      Download :- Full format your phone then new installation of update Rom

      install & enjoy Jelly Bean

  13. I have upgrade my Canvas A110 to JB from Micromax Service station but my internet from Sim card is not working (but play store is accessible and download is running) but watsapp and FB yahoo and gmail is not working while it is working very fine on connecting to Wifi pls suggest wat has to be done

  14. open sp tool
    load scatter file after that first click to download
    then connect your switch off phone

    if not work these steps then install Cynus T2 V17.01 Jelly Bean Click Here
    it is Best Rom for Canvas 2
    I am use this also

  15. hello abhishek sharma ji…
    i have updated my phn to JB,but now its proximity sensor is not working properly so i want to revert back to ICS. need help…i have also downloaded ICS stock ROM…but sptools doesn't find my phone…it continuous show "searching"
    plzz help me plz…

  16. hey if i have rooted my phone with binary rooting tool, will i be able to update my phone to jellybean?? please reply fast.

  17. hi , i did a perfect way ,,it successfully completed .i am having jb in my mob…
    the problem is caller image is small ,can u help this matter…

  18. Hello Abhishek ji… i just wana know is this JB Rom has gps.conf file.. what is making me to ask this quary is.. in the official JB rom strange thing was that it did't had this file. Second about its #G service.. in the back cover its written 7.2 Mbps HSDPA and 5.2 Mbps smthing HSUPA.. i used aircel sim converted to 3G..and used a specified net pack and it did change from (E) to (3g) then (H).. first day it gave me gr8 speed but the next day it showed a lesser efficiency. So, i used speedtest.net apk to test it.. and it is showing 0.14 & 0.10 Mbps..(and sometime even more less).. why is that.. Is it bcz of the net pack or smthing else… plz mail me and give me a clear detail of this.. I also tried some tweaks.. but aah..!! plz help me in this matter..

  19. Hi! I'm planning to upgrade my MyPhone A919 (Micromax A110) which is still on ICS to Jelly Bean. Should my phone be rooted first before doing this or can I automatically upgrade from ICS to JB just by following the instructions you gave above?

    1. So first step is install cynus T2 ROM without rooting. Second step is to ROOT after cynus T2 ROM. :) Then after I do these steps, I can upgrade my phone to JB V3, did I get it right? :)

    2. no cynus T2 jelly bean is best as compere Micromax V3 JB
      so i told you that you will install cynus t2 and after root enjoy you phone with max. use.

  20. Sir can you help me i have upgraded my myphone a919 to jellybean for micromax a110 like in that post but when i have upgraded there is no rear cam to switch just front cam is appearing and functioning?do you know how to fix it?my friends in facebook do not have that problem when they have upgraded but we have the same cellphone please help me

  21. Plzz provide me correct zip file which I can install by CWM recovery….I HV already a zip file whose size is about 107 KB…BT it always shows installation aborted….

  22. I am not able to install the drivers. When I connected my phone (Switched off) windows shows drivers not found when phone is on then it detected. Please help.

  23. Hi Abhishek
    Need help, does upgrading to jelly bean also upgrades languages. i need to install Russian language in canvas 2. it doesnt matter if operating system ll be icecream or jelly bean

  24. Dear Abhishek when i Connect my mobile to PC in Off mode It start Charging and MY PC recognise for few sec. soo SP Tool is not Recognising my phone.
    Please provide me a solution for this

    Thanks

    1. hi abhi

      i will post flashing Rom with SP tool because lots of people face problem in update Rom via sp tool.

      good day

  25. hi abhishek i hav a small pblm in ma mobile…every time i end my call it displays a msg like "load info about last call is failed "
    how can i resolve this pls help me…

    1. may be it is Mobile operator problem.
      if it is your mobile problem then rest your mobile or Clear Cache and Dalvik Cache

    2. then i got a info abt jb official updat. is it get an error on google play service is this true???

    3. how to do that??

      Switch off your phone then press & hold Vol. Up and Down key + power button
      after then get two option
      press Vol. up key and select recovery option

      chose wipe cache
      and reboot

      if problem not resolve the select reset option

      good day

    1. install these driver
      Micromax A110 Vcom Driver
      switch off your phone
      open sptool run as administrator sptool.exe
      select scatter file
      then click Download
      then connect your switch off mobile
      not search then after few min battery icon come then disconnect
      then once again connect
      i think your phone will detect
      Good day

  26. Also can you please let me know how to root official jellybean updated phone? I rooted when I had ICS but the same method did not work for jellybean/

  27. I am facing some wierd problem after upgrading to jellybean. My GPS locks when I do it through GPS test application but when I switch to map it disconnetcs the lock and again keep on blinking GPS icon and it never connects through map. When I again move to GPS test app it locks. What could be the problem and possible workaround?

  28. After jelly bean upgrade…headphone buttons are
    not working for music switch and system is
    eating too much RAM..only 80to 100MB RAM is
    found free….any suggestion….plz..
    provide updated jb ASAP plzzz

  29. i have downloaded S9081_MP_F4.1_B1_IN_MMX_1.10… in some vedios i can see 1.16… so which is the latest one?

    1. update ver is S9081_MP_F4.1_B1_IN_MMX_1.11
      ok

      Software release notes:
      1. Operating system is upgraded from ICS to Jelly bean.
      2. M! Store is removed.
      3. New wallpapers are integrated.
      4. Software is backward compatible with old TP available(BYD Make).
      5. Power on animation is changed.

      Hardware release notes:
      1.TP is changed from BYD to BAOMING.

  30. SP flash tool is not detecting my phone.. its keep on searching.. i did everything correctly.. opened as administrator, installed divers, switched off phone.. tried all the available ports. etc.. i am using windows 8…. plz help

    1. windows 7 also
      if you dont have use your friend system for recognize that problem in your phone or system problem!!!

  31. install these driver
    Micromax A110 Vcom Driver
    switch off your phone
    open sptool run as administrator sptool.exe
    select scatter file
    then click Download
    then connect your switch off mobile
    not search then after few min battery icon come then disconnect
    then once again connect
    i think your phone will detect

    1. it is not v4. it is bugfix JB update 18-3-2013
      yes micromax released another JB update 18-3-2013
      we will provide it in night

  32. Abhishek Micromax has released another JB update.
    Could you please provide the link to second official jb update

  33. m.olx.in/item/show/489414158
    See it …
    They updrage ram and CPU….
    Yaar yea possible hai kya…

  34. I just called local Micromax service center to
    confirm about JB update and they said update
    is available with them but Micromax has just
    called them not to update handsets as there
    are some bugs with this JB version so they are
    going to provide one more JB update in next 10
    to 15 days. is that true..??

  35. I followed the above steps. after pressing firmware->upgrade the flash tool detected the phone and process started. After thet i got a message BROM ERROR : S_FT_FORMAT_FAIL (4010). Now the phone is nor Switching ON, neither being detected by Flashing Tool. Worried What hass Gone Wrong

  36. "email service stopped due to low storage" i am getting this error when configured gmail and then exchange account…

    even though having enough space internal as well external..

    what i need to do to get ride of this message

    1. hey i hav dwnloaded a jellybean setup from (Dev-Host).. when i m copng it in my sd card for installing .. i didnt see it .. can u plzz tell me what to do now..

      plzz tell me in a easy way!

    1. copy camera apk & past system folder
      rename it (it should have same name as your app folder camera file)
      set permission wr-r-r
      move to app folder
      reboot

  37. what is the first step to upgrading my a110 into jellybean? first can i upgrade my phone(install jellybean)? or first can i rooting my phone? i m confuse so plz help me out

    1. means phele main jelly bean v3 ko install karu r8 jo apne uper step diye wese? or uske baad root karu phn ko??

    2. go to recovery mode and take backup
      Press Vol. Up and Down key + Power Button
      then press up key go to recovery mode
      nd take backup

  38. Hi abhishek!
    there was one feature cynus t2 rom which gives call connect vibrate, whereas micromax has removed that feature in official jell bean update, is it possbile to get that feature i tried various app but not working on micromax a110 jelly bean updated rom.

    1. setting –> profile –> general –> tick on vibrate devices for incoming calls

    2. i was not asking that..there's one feature which vibrates when outgoing call gets picked up ,this feature was in cynus t2 rom but not in micromax jelly updated rom.

  39. After installing the jb update to my canvas 2 is there any chance of voiding my phone warranty…??? Plzzz do reply

  40. After installing the jb update to my canvas 2 is there any chance of voiding my phone warranty…??? Plzzz do reply

  41. after flashing, i am having an Invalid IMEI, cant call anyone, neither are the calls coming to me, i need urgent help

    1. try this
      Change ur imei by this method

      1- go to em with this code "* # * # 3646633 # * # *" (just type it on call pad)
      2- then follow that path –> CDS info –> Radio info –> Phone1 (for the first imei)
      3- at the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (instead of IMEI_1 put your first imei number)
      4- hit send command
      5-if you done just reboot the phone, if you change the second imei go to step 2 and select "Phone2"
      6-and enter the code "AT +EGMR=1,10,"IMEI_2" (instead of IMEI_2 put your second imei number) hit send command
      7-reboot

    2. abhishek u r a genius, i also have same problem. thank u for ur help. thanks thanks a lot!!!!!!!

  42. are the drivers required to install on the phone or the pc ?
    please provide me with link of the drivers, which i need to download .

    1. when you connect your phone to PC the one of phone drive have driver
      it have 86x 64x driver
      these driver install in PC

  43. Well the update went wrong for me, I used the Smart Phone Flash Tool, i switched off my Canvas 2 and connected it to my PC via usb cable and clicked Download in the Smart Phone Flash Tool, but disconnected the phone later… Now nothing is getting downloaded in the software and also my phone is not starting up.. What to do…? Please help

    1. read this post careful. use only this post sptool & update file

      open sptool run as administrator sptool.exe (if you are using Window 7 or 8)
      close firewall when updating your phone

      click on download

      remove battery the put it again

      don't switch on your phone

      connect phone to PC

      after same time phone detect by PC

      start flash your phone
      don't interrupt this processes
      green ring appear then disconnect your phone
      switch on
      enjoy

  44. Hi,

    after flashing it to new JB update i got this update message from OTA

    “System updates

    During update, any operation is disabled. It will take a few minutes.

    Update now”

    after clicking “ok” but nothing is happening and its still shows like this

    i got screenshot also for this…

    Is this normal or something else….

    Please suggest what it is…

    1. I am also facing same issue… it says ota update is available but nothing is happening on click of OK button.

  45. Dear Hero,
    I install MicroMax official JB ROM on my Qmobile a10 as you advised butt now there are NO signals on my both sims.

    RAZA from LAHORE PK

    1. ok
      now replace your old modem.img to new os Micromax Jelly Bean
      open root explorer go to system folder
      replace System/etc/firmware/modem.img and set permission wr-r-r
      Reboot……..Enjoy Jelly Bean

    2. after flashing TWRP recovery i start fone in recovery mode for instaling superSu but in recovery Mod fone struc in TWRP display screen….may be i place supersu zip in extrnl sd card instead of internal mem. please advice

    3. One thing more tell me now i need to replace Modem.img. which one for replacemen my cynus t2 Modem.img or my Qmobile old 4.0.4 modem.img ?

    4. If Cygnus t2 modem.img work for you then replace with this

      If not then replace with your phone ROM Qmobile

    5. can't able to replace modem.img .also cant change permission.
      i never done this before so please help me

  46. just now update to new rom but there few things is missing like wi-fi direct, tv out function etc what we found these in custom rom or Cynus T2 jellyBean update..

    if we want these then how to do it? and also wallpapers from cynus rom..

    1. yes Cynus T2 jellyBean update is batter
      wi-fi direct
      tv out
      PDF Viewer
      TO do
      lots of many thing

  47. Okay Thank You bro,
    but I have heard that Micromax not gone provide the updates of JB over the air (OTA)
    use have to take your mobile to authorized service center

    1. thats why it is flash-able, not uneatable update vai OTA
      it authorized ROM
      update it
      good day

  48. Hi Abhishek..!!
    I want to know that is this rom is official or custom rom ?
    I don't want to void my phones warranty
    so please help me

Leave a Reply

Thanks to leave a comment. Please note that all comments are moderated according to our comment policy and your email address will NOT be published. Please Do NOT use keywords in the name field. Lets have a meaningful conversation.