How to Root and Install CWM/TWRP Recovery in Micromax A110 official Jelly Bean 4.1

This is easiest method of Root for Micromax A110 and Cynus T2 official Jelly Bean 4.1. In this method we are rooting and install CWM/TWRP custom recovery in Micromax A110 Canvas 2.

Micromax A110 is superb phone and first popular phone from Micromax side. It has 1GHz Dual core processor with MT6577 chipset. This phone has 512MB of RAM, 4GB inbuilt memory with Android 4.1 Jelly Bean. It has 5MP rear camera and 0.3MP front camera for video chat.  Canvas 2 got third update Stock Rom V3 Jelly Bean and previous update was Stock Rom V2 ICS 4.0.4. Now this update your phone with Jelly bean.

Root Canvas 2, because root allows for you to use a maximum of your phone without any restrictions. After root you will install custom apps, custom Rom and custom setting in your phone. We already discuss on Root Advantage and Disadvantage by earlier post.  and we already saw “How to Root Micromax A110 Canvas 2 ” in this post. 


Preparations of Root: - 

1. Take a backup of your phone click here.

2. Your phone battery should charge 80% minimum.

3. Make sure proper power backup of your PC.

4. Read all steps then do it careful. 

Download:

1. MT6577 Scatter file Click here to download

2. SP-Tool for Canvas 2 Click here to download


4.  CWM Recovery or TWRP Recovery 

5. Update-SuperSU.zip file Click here to download

How to install custom recovery and Root Micromax A110:

Step 1: Install drivers in your PC (If you feel any problem in install driver then watch this video Click here)  and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it ( If your phone have Android 4.2 or upper version then see how to enable Developer options here is guide of this Click here). After then switch off your phone.

Enable-debugging

Step 2:  Download SuperSU file and copy in your phone memory card. Now Download CWM recovery and scatter file of your phone and extract these file in a folder where you want. Extract and open the SP Tool. Sptool.exe Run as Administrator.

SP-Tool

Step 3: You will see an SP tool window, now click on the scatter-Loading option in the SP tool. Then you will get the new tab of SP Tool which you ask the location of the scatter file on your PC. Now select the "Android_scatter_emmc.txt"  fileSee in this image.


select-the-file-Android-scatter-file

Step 4: Now connect your switch off phone with PC via USB cable (Make sure your phone is switched off).
Connect-your-Phone

Step 5: SP Tool detect your phone and process will start. If Sptool is not recognize/detect your phone then install vcom driver read this post it will help you 
click here  (Driver already in phone flash drive if you don’t have these drivers then install it)



Root-via-Sptool

Step 6: Now start installing recovery in your phone by flashing.


start-downloading-recovery

Note: - Don't interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.
Step 7:  After the process complete, a green ring will appear. 

green-ring

Step 8: Disconnect your phone. 

Step 9: Do not start your phone. Press and hold vol. up & down + power button then select “recovery mode” (If your touch not work then use volume up and down key for menu up and down and Power button as a enter button)

recovery-mode

Step 10. Click on install button/ choose install and select SuperSU-v2.01.zip  file from your save location on your SD card and install this file. Now  reboot your phone.

If you feel any problem then watch this video click here.

Enjoy Rooted phone.


Note: I am not responsible if you make Mistakes and Bricked Devices.

302 comments:

  1. Hi abhishek,

    Iam facing a strange problem i have updated my A110 from ICS to Jelly update from download link given by you.
    Everything is fine but one problem on every reboot a message is sent to micromax stating congratulations on purchasing and it deducting Rs 1.50 for the sms sent.

    Please provide any solutions as it deducting balance on every reboot.

    eagerly waiting for a solution.


    ReplyDelete
    Replies
    1. if your phone is rooted phone then i can resolve your problem
      open root explorer go to system---.> app folder ----> press & hold smsreg.apk ---> click on delete

      reboot
      resolve your problem

      Delete
    2. install avg antivirus from google play and then go to to privacy and backup its simple backup apps are stored in "droidbackupdir" folder in sd card

      Delete
  2. Thanks a ton for the solution it really worked for me.

    ReplyDelete
  3. I start download 1 hour ago smart phone flash tools but its shows searching....

    ReplyDelete
    Replies
    1. your phone not detected by your PC
      Disconnect remove battery
      put it again and connect your phone

      Delete
    2. but I am trying it but dont connect the phone before your click on download
      once you click on download connect the phone via usb

      Delete
    3. install driver
      Micromax A110 Vcom Driver
      switch off your phone
      open sptool run as administrator sptool.exe
      select scatter file
      then click Download
      then connect your switch off mobile
      not search then after few min battery icon come then disconnect
      then once again connect
      i think your phone will detect
      Good day

      Delete
    4. same problem with me,and how can i install vcom driver? its only notepad file,
      i also tried with device manager but it says,it is upto date!!!
      thanks

      Delete
    5. hi onkar
      watch this video it will help you click here

      Delete
    6. Hi abhi,
      i watched that video,am currently using windows 8,is this making a issue to update? because drivers are upto xp to windows 7.

      Delete
    7. windows 8 64bits..how to install drivers for micromax a110??

      Delete
    8. install 64bit driver of micromax a110

      download driver from this post click here

      Delete
  4. can you suggest some good Root apps.
    Thanks
    Amrut

    ReplyDelete
    Replies
    1. i am posted lots of root apps in this blog
      read & use it
      good day

      Delete
    2. Hello Abhishek,

      Thanks for the reply but i think the hyperlink is missing.

      Also since the upgrade the Sending SMS is not working.... any thoughts on that?

      Regards
      Amrut

      Delete
    3. read this blog so many app here for rooted mobile

      Delete
  5. Sir pls help my issue am updated mobistel Cynus t2 . 2 nd sim not working vodofone and aircel network . Idea DoCoMo 2 and sim working pls find my issue

    ReplyDelete
  6. Root your phone (click here to how to root jelly bean) ---> install root explorer ----> replace modem.img file from V2 ROM

    System/etc/firmware/modem.img replaces and set permission (rw-r-r)

    and Reboot........Enjoy Jelly Bean

    DownloadModem.img V2 file


    sir u say steps i try step by step .
    * modem.img changed v2 rom set permission rw-r-r .repeated not working vodofone @ aircel network .
    * sir i try rooting not success . i try rooted mobile uncle tool . app say root android frist .
    * i dont know next, am very poor guy . i have one mobile only . no micromax
    service center my places . i hope only ur suggested
    * (1) vodpfone and aircel sim not working
    * (2) not rooted
    * (3)system updates not working . checking for update network connection faild ******* sir am waiting for ur suggest pls pls help . life long thank ur hand pls resolve my issue

    ReplyDelete
    Replies
    1. rajakannu4224@gmail.com . my mob num 9600200553

      Delete
    2. hi raja
      click here Read this post it will help you in root your mobile then replace modem.img file in System/etc/firmware/modem.img replaces and set permission (rw-r-r)

      Delete
    3. Download CWM Recovery/ TWRP Recovery and rename it as recovery.img then replace it with recovery.img of Micromax A110 Jelly Bean ROM Folder
      Load scatter file in SP-tool from Rom Folder and uncheck all options except recovery.img
      **sir sorry for the trouble .. i have cwm recovery.img and twrp recovery.img . how is rename , where is rom floder already have mobile ?? o or am create my laptop desktop . how is replace recovery.img
      u have any screenshot pls
      ** sp tool version
      ** already my mob system/etc/firmware/ permission rw--r--r
      ** pls my request . pls pls pls pls pls pls pls pls pls pls

      Delete
    4. ok i will post a video for you but it will take time........

      Delete
  7. sir am wait for u r video post ,,,,,, pls sent me sir

    ReplyDelete
    Replies
    1. it will take time........ because i am too busy today

      Delete
  8. sir atleast say which place in rom floder ?????*****.Download CWM Recovery/ TWRP Recovery and rename it as recovery.img then replace it with recovery.img of Micromax A110 Jelly Bean ROM Folder *************** i try system floders . i have not mobile now . pls consider my problem

    ReplyDelete
  9. download Rom folder click here

    Download CMW/TWRP recovery click here

    then rename it. It's name should be recovery.img

    then copy & past in Rom folder

    click on yes

    then flash recovery via Sptool

    ReplyDelete
  10. i dont know this steps . pls u have any video post

    ReplyDelete
  11. sir my mob complaints
    ** no root
    ** no su binary
    ** no vodofone and aircel network problem .... i have all downloads . how to install pls ,,,, pls screenshot or video post ........ am not understand u r steps , am first time use smartphone . pls release me this problem . i have only for ur answers

    ReplyDelete
  12. Sir I need ur help .....................

    ReplyDelete
  13. this is video tutorial for you click here

    download modem.img click here
    after root install root explorer

    copy downloaded modem.img ---> past system folder set permission wr-r-r
    move to etc/firmware ----> click yes to replace

    reboot

    enjoy

    ReplyDelete
  14. Big Thank u sir . U r genius sir . I will try sir .

    ReplyDelete
  15. Big Thank u sir . U r genius sir . I will try sir .

    ReplyDelete
  16. Dear sir, I am using windows 8 operating system..I want to know whether this is compatible with this is...I also don't find Android gadget CDC driver.inf file in your download link..I have read and followed all the steps you send it to me...I could not update my mtk driver w1152.its displaying as" not enough storage".. so please fix my issue as soon as possible

    ReplyDelete
    Replies
    1. Dear sir ,
      I try a A110 X 86 driver . Some file missing vcom driver not install . Am not go next step . Pls preloder vcom driver how to install my 64 bit laptop . pls some mtk com driver web site link . Pls 64 bit USB mtk vcom driver link . Pls u r solution . pls genius help me

      Delete
    2. install driver from this post click here

      Delete
    3. Sir , I have all drivers . Windows 8 model . Cynus t2 ROM . What driver install sir . Not flashing sir . Connect the USB only charger simple only . Not a flash . How is send screen shot . I explain my problem . Mtk vcom install then my laptop not enough stroge ????? . How is accept MTK vcom driver

      Delete
    4. Dear sir , pls u have any other idea . I think reinstall micromax a 110 4.04 original os . U suggest me sir . Now jelly bean4.1.1 I like but vodofone and aircel networks not working , my places only have vodofone and aircel signals . Last one month I try this problem not solve am upset sir . Pls I have only u r suggestions . U r my god pls save my mobile

      Delete
    5. i will try to my best but i am not god, god is god ok

      ell me few point

      1. your mobile is rooted?
      2. which version you use ?
      3. have you try replace modem.img?
      4. can you try all this on windows 7?

      Delete
    6. Dear sir ,
      1. No rooted
      2. Windows 8 .
      3. I am replace modem .IMG . Permission rw-r-r here .
      4. Today I try windows 7 .

      Delete
    7. Sir . Am now use in mobistel cynus T2 17 . Custom rom

      Delete
    8. try on windows 7 if you have any problem then tell me

      good day

      Delete
    9. Sir . Big thanks . u told all steps am implement now my mobile rooted . But network problem not clair . I try modem.IMG replace and change permission rw-r-r . Next sir waiting for or reply , pls slove my network problem

      Delete
    10. I have followed all your steps and successfully rooted my mobile..but network problem is not rectified yet..so what I hav to do further?

      Delete
    11. replace modem.img file then set permission wr-r-r and reboot your phone

      Delete
    12. Sir I try modem.IMG replace permission rw-r-r here . How is change wr-r-r . I have app root file manager and es file explore and download modem.IMG file . Pls u say how is change ???? Pls

      Delete
    13. you are right this is rw-r-r but it is write wr-r-r

      Delete
    14. How is write ? Sir . I don't know . Explain sir . U have any screenshot ? Sir

      Delete
    15. write read - read -read
      i will post a video for this

      Delete
  17. Sir I have flashed my a110 with ur kind step by step process and provided downloads...firstly I want to say that ur super genious...and very kind of heart...and second thiong is this that..when I flashed my mobile to mmx a110 4.1 rom and I started my cell there is one problem for me.., I m seeing that there is only on canvas written on boot screen amd on animation too....there is no canvas2 written on that...its boot animation is a89's boot animation..pls provide me a link to download the new a110 canvas2 boot animation and boot screen...and steps to replace it .....pls help me sir...pls....I will wait for ur..rply...thanks...Sir....

    ReplyDelete
    Replies
    1. Sir am waiting for u r reply ??? Pls solve me my issue sir ?

      Delete
    2. Sir . Micromax a110 update s9081 .1.10 . Update flash able sir . Update is successful . But invalid imei here . sim management hide . What to do ? Sir pls considered my issues

      Delete
    3. try this
      Change ur imei by this method

      1- go to em with this code "* # * # 3646633 # * # *" (just type it on call pad)
      2- then follow that path --> CDS info --> Radio info --> Phone1 (for the first imei)
      3- at the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (instead of IMEI_1 put your first imei number)
      4- hit send command
      5-if you done just reboot the phone, if you change the second imei go to step 2 and select "Phone2"
      6-and enter the code "AT +EGMR=1,10,"IMEI_2" (instead of IMEI_2 put your second imei number) hit send command
      7-reboot

      Delete
  18. Sir, for installing cmw rooting must be needed, im in official jb1.11 my camera is nt nice i patched vivid colour it works fine fr me thanku fir dis patch.., with out rooting we cannot install cmw

    ReplyDelete
  19. Subramani18 May, 2013

    Hi, I am trying to root my Micromax a110, however I am unable to find ROM folder. Where is this folder located?

    ReplyDelete
  20. plz help how to root latest mmx a110 jelly bean 4.1.1 pre installed????? and i m trying to run it in cwm mode but it always run in android system recovery mode....plz help how to run the cwm mode....!

    ReplyDelete
    Replies
    1. hi Nikhil

      read this post & watch video both are help you

      how to root Micromax jelly bean click here and video click here

      Delete
  21. Anonymous02 June, 2013

    Can you please tell me, whether the phone will reset if i flash recovery.img using SP tools...just the recovery.img in my v3 ROM official Jellybean?

    ReplyDelete
    Replies
    1. no phone will not reset

      watch this video, it will help you click here

      Delete
  22. thanks a lottttt dear finally i hv rooted my device mmx a110....but nw plz tell me how to move default apps into sd card..??......and when i hv installed Hypermod rom in my device it will show error "unfortunately the process android.process.acore has stopped" why it is so...plz tell me how to fix this problem....and which rom is best for my device....:)

    ReplyDelete
    Replies
    1. good, now enjoy rooted phone

      if you took backup of your mobile then restore

      if you did not take backup then re-install and take backup

      it is necessary because in rooted phone it is common problem

      good day

      Delete
  23. pankaj tripathi07 June, 2013

    Sir I have complete this process n green ok is show.but jab Maine phone on kiya to sirf superphone ka logo aa raha.aur kuch bhi nahi ho raha.pls help me Mai kya Karu ?

    ReplyDelete
    Replies
    1. hi pankaj

      after root did you go recovery mode or not

      because after root don't start phone first go recovery mode via press Vol. up & down key + Power Button
      then select recovery mode and install supersu

      Delete
  24. pankaj tripathi07 June, 2013

    no i cant.maine sirf copm pe sari file install ki n sp tool ke throw apna phone connect kerke update kiya hai

    ReplyDelete
  25. pankaj tripathi07 June, 2013

    thanks u lot sir .mera phone update ho gaya.thanku lot

    ReplyDelete
  26. pankaj tripathi07 June, 2013

    Sir but video .audio n display quality is to bad.what can I do

    ReplyDelete
    Replies
    1. Install Vivid Color for Display click Here

      Install Acid Audio for Audio click Here

      Delete
    2. pankaj tripathi13 June, 2013

      Sir external SD card is not support after this rooting method.what can I do? Pls sir reply

      Delete
  27. pankaj tripathi13 June, 2013

    N in recovery internal SD does not shown its show adb so I install super su from external SD card

    ReplyDelete
    Replies
    1. it have back option

      go back than select internal SD

      Delete
  28. pankaj tripathi17 June, 2013

    My ext SD card run by mount but today's morning when I switch on my mobile my internal SD card also be called damaged n my external SD card now not be mount its continues show damaged.many times I remove n inset SD card but no improvent.pls sir help me n if I install new jb (293 mb) then any advantage with this problem

    ReplyDelete
    Replies
    1. i think this is a error of ROM if you are install Jelly Bean V 1.11 new update then it resolve.


      Delete
    2. pankaj tripathi17 June, 2013

      But sir many people say that jellly bean v1.11 have many more problem with micromax a110.
      Its true or false?

      Delete
  29. pankaj tripathi17 June, 2013

    Pls sir reply

    ReplyDelete
    Replies
    1. no jellly bean v1.11 is best update of micromax a110
      so install it

      if you feel problem then install v3 1.10

      good day

      Delete
  30. utkarsh singh17 June, 2013

    my a110 got bricked now what should i do next

    ReplyDelete
    Replies
    1. Micromax A110 is not hard bricked device

      it is soft brick so install Rom once again

      Delete
  31. MERE PASS ANDROID VERSION 4.1.1 HE TO KYA YE V3 HE YA USSE BHI AAGE KA VERSION HE

    ReplyDelete
    Replies
    1. yes it is v3 but V3 has to version 1.10 & 1.11

      Delete
    2. jelly bean se achha he ya jelly bean4.1.1 achha he?

      Delete
    3. 4.1.1 is jelly bean

      but micromax release two update of jelly bean 4.1.1

      one is v3 1.10

      second on is v3 1.11

      Delete
    4. MERE PASS 1.11 HE

      Delete
    5. this is latest update of micromax A110. so enjoy it

      Delete
    6. thanx bro...........

      Delete
  32. pankaj tripathi03 July, 2013

    Sir pls tell me that how many times we change or format ROM on MMX a110 in safety purpose.

    ReplyDelete
    Replies
    1. no limits
      safety is flash careful
      make sure you have proper power backup then do
      when you sure, you are understand all steps properly

      Delete
  33. hiiiii ur rooting method is good but its truely nt wrkng i dnt realy knw wt is d prob , i found wen i try 2 press dwnld button it says not all images of recovery ar placed ssmthng like dat and download anyway if i click yes and den it shows nothng no progress it stucked dats it no green ring , drivers r properly installd nd it detect my device but ur tool is nt wrkng pls tell me d solution

    ReplyDelete
    Replies
    1. you did mistake it is easiest method.

      first download custom recovery then rename it recovery.img and replace custom recovery to stock Rom recovery

      after that open sptool rus as administrator sptool.exe

      select scatter file uptick all, select only recovery

      click download button then connect switch off phone to PC

      process will start then finish

      do not on your phone

      go to recovery by pressing & hold Vol up and down key + power button
      select recovery then install supersu file

      good day

      Delete
  34. i hav done it but no result bro same thng no progress :( and what do u mean by replAcing recovery and how to ?????? does it mean choosing i have chosen it but before scatter loading ???? where i didnt got u i thnk

    ReplyDelete
    Replies
    1. ok

      watch this video it will help & explain "how to root Micromax A110 Jelly Bean 4.1 click here

      Delete
  35. brothr u made dis vdo on xp and i hv window 7 and also it shws a110 adb drivrs us up to date wt 2 do :(

    ReplyDelete
  36. pls bro write d steps below or give a link for windows 7 plssssssss

    ReplyDelete
    Replies
    1. i give you play list of my video i think you watch wrong video

      here is direct link click here this is windows 7

      Delete
  37. hey bro i updtd my fone via care center so hw to replace d image file in rom as i dnt hav any rom and i followed all d steps but still stucked wt 2 do :( i saw ur vdo also .

    ReplyDelete
    Replies
    1. it is very simplest method,

      let me check of you preparation of root

      did you download Jelly Bean rom V3?
      did you download recovery.img file?
      did you download Sptool ?

      Delete
  38. yes i hav jellybean v3 1.10 which is updated thru micromax care center and i also dwnld sp tool and recovery file

    ReplyDelete
  39. yes i hav jellybean v3 1.10 which is updated thru micromax care center and i also dwnld sp tool and recovery file

    ReplyDelete
  40. yes i hav jellybean v3 1.10 which is updated thru micromax care center and i also dwnld sp tool and recovery file

    ReplyDelete
  41. do i need 2 dwnld d rom or recovery and scatter file is enuf coz i dnt hv rom

    ReplyDelete
  42. no you need to download rom and recovery & sptool, supersu update zip file

    then extract Rom folder replace recovery.img file in rom folder

    then open sptool run as administrator sptool.exe

    load scatter file untick all then tick only recovery

    click download then connect switch off phone

    finish disconnect go to recovery by pressing & hold Vol up & down key + power button

    select recovery mode then install supersu zip file

    finish

    ReplyDelete
  43. brothr i hv done it still nt wrkng u thnk its bcoz of d drivers bcoz wen i connect d fone i cant see micromax a110 preloader as wen i update drivers it say its updated but wen i connect my fone it doesnt show :( i am really so pissed of wid dis jb update , ics wz better easy to root and update...

    ReplyDelete
  44. brothr can u provide me official ics stock rom and also cn u pls tell me dat is it possible to flash it thru stock recovery ????? coz i dnt thnk for me flashtool is really working

    ReplyDelete
    Replies
    1. install cynus t2 Rom with stock recovery

      then connect your phone with PC

      after that you will flash ICS Rom

      here is link cynus t2 Rom Click here

      it is best Rom for Micromax A110. i am using it

      Delete
  45. but brothr again d fact is flashtool is really nt wrkng 4 me if i flash dis rom how i will root my fone and also widout flashng cwm/twrp i cnt flash ics back , is it not possible to flash ics by stock recovery ????????? as its a stock rom :(

    ReplyDelete
  46. Cynus T2 Rom install with Stock recovery so install it "no root and CWM required"

    good day

    ReplyDelete
  47. thnx bro but u misundrstood wt i said ok assume if my fone is running on cynus t2 den how i will install cwm/twrp ?????? bcoz i am unable to run flashtool :( and i cant root my fone widout installing cwm/twrp dats wt i am sayng

    ReplyDelete
    Replies
    1. can you install driver once again ?

      follow these method, i am posting a link of my video watch the install driver

      click here for video

      Delete
  48. I want scatter loading 5677 file..please send me..

    ReplyDelete
  49. I want scatter loading 5677 file..please send me..

    ReplyDelete
  50. thanx a lot bro i have done it nw ma fone is rooted :)

    ReplyDelete
    Replies
    1. welcome

      at last, have fun with rooted Device.

      Delete
  51. Anonymous21 July, 2013

    try this
    Change ur imei by this method

    1- go to em with this code "* # * # 3646633 # * # *" (just type it on call pad)
    2- then follow that path --> CDS info --> Radio info --> Phone1 (for the first imei)
    3- at the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (instead of IMEI_1 put your first imei number)
    4- hit send command
    5-if you done just reboot the phone, if you change the second imei go to step 2 and select "Phone2"
    6-and enter the code "AT +EGMR=1,10,"IMEI_2" (instead of IMEI_2 put your second imei number) hit send command
    7-reboot


    This worked for me...

    THANK YOU VERY MUCH ABHISHECK... :)

    ReplyDelete
  52. I just want to root the phone to rectify the NVRam error I got during update to JB. can I avoid the recovery option? The MAC address is changing continuously and NVram error appears in WiFi. So I want to remove this error and it requires rooting! Help please.

    ReplyDelete
  53. How to do step 2? How to replace it? Where is the file located? Download CWM Recovery/ TWRP Recovery and rename it as recovery.img then replace it with recovery.img of Micromax A110 Jelly Bean ROM Folder

    ReplyDelete
    Replies
    1. yes it right

      after replacing open sptool

      run as administrator sptool.exe, load scatter file

      untick all, tick only recovery then flash

      after that do not start your phone go to recovery by pressing & hold vol. + & - key and power button

      install supersu

      Delete
  54. Anonymous25 July, 2013

    this not help me my frnd...when i do all these steps than aftr click on dwnld option when i connect my phone to pc its says.....


    [common hint for sp tool issue:-
    please supply ur tool version,GUI screen shot and too log...when u try it with the latest tool...
    1. Run tool
    2. press cntrl+alt+t[Run time trace mode]
    3. [Menu] Help-[Submenu] open logs folder

    BROM ERROR:-S_DA_SOC_CHECK_FAIL{2013}
    [USER] SOC VERIFICATION FAIL!
    [HINT]:



    tHIS is the error shows artr connect..!!

    ReplyDelete
    Replies
    1. download rom folder and recovery & sptool, supersu update zip file

      then extract Rom folder replace recovery.img file in rom folder

      then open sptool run as administrator sptool.exe

      load scatter file untick all then tick only recovery

      click download then connect switch off phone

      finish disconnect go to recovery by pressing & hold Vol up & down key + power button

      select recovery mode then install supersu zip file

      finish

      Delete
  55. Anonymous27 July, 2013

    Hello...
    Dear, My All Process Done But when Last Recovery Step [power button & both volume key] i saw 9 option [install] [wipe] [backup] [restore] [mount] [setting] [advanced] [reboot], but can't Click Or Touch any option....
    Now How To Install " UPDATE-SuperSU-v1.04.zip " file.....

    Please help me,,,,,

    ReplyDelete
    Replies
    1. click on install option then choose UPDATE-SuperSU-v1.04.zip and install it

      Delete
  56. Anonymous27 July, 2013

    Sir, I'm trying to many time but can't touch on any option...

    ReplyDelete
    Replies
    1. which recovery install you CMW or TWRP?

      Delete
  57. Anonymous27 July, 2013

    whats the problem?
    My phone details.
    Android Version: 4.1.1
    Build Number: ALPS.JB.MP.V1
    Custome Build Version: S9081_MP_F4.1_B1_IN_MMX_1.11

    ReplyDelete
    Replies
    1. no problem with your phone

      i want to know that which recovery you install CMW recovery or TWRP recovery?

      Delete
  58. Anonymous27 July, 2013

    TWRP Recovey

    ReplyDelete
    Replies
    1. ok re install twrp recovery

      all process same

      do it one again before read careful this post, It is very easy method
      don't worry

      Delete
  59. Anonymous27 July, 2013

    I'm trying to this step 8 To 10 Time but i face same problem, no touching or clicking any option, and i've also UPDATE-SuperSU-v1.04.zip file.

    ReplyDelete
    Replies
    1. trying once again if not work then use CMW recovery

      Delete
  60. Anonymous27 July, 2013

    CMW Recovery Is Clock word Recovery naa?

    ReplyDelete
  61. Please Give me Other Version TWRP Recovery Image, this recovery is not working.

    ReplyDelete
  62. hello sir,
    please tell me how to root my micromax A110 unofficial jelly bean(mobistel cynus T2 17 . Custom rom)

    ReplyDelete
    Replies
    1. Read this post and follow these steps. It is easy to root

      Delete
  63. hey bro!! 1st of all thanks a lot. but i have experienced a problem.. touch doesnt work in twrp mode i cant select any option and so i cant install super su.. please help.. also now if i want cwm mode can i repeat the procedure with cwm recovery image? will it cause any prob o do i have to install twrp only!? please help!! waiting for ur reply!! thanks!!

    ReplyDelete
  64. install only one, TWRP or CMW recovery

    download recover from this post click here

    ReplyDelete
    Replies
    1. n can i install this recovery the same way or is there any other procedure?? i m sorry if these questions seem stupid but i m new to this so please bear with me.. n thanks a lot :D waitin 4 ur reply!! :)

      Delete
    2. procedure is same, do it and enjoy rooted phone

      Delete
    3. Thanks a ton bro!! it brought a huge smile on ma face n i pray u ll always have a smile like this!! great job!! keep up the gud work!!

      Delete
    4. welcome

      join us on G+ and FB

      Delete
    5. bro the rooting was succesful then i installed one rom using twrp but the phone wud hang at the boot animation it wud not go ahead. then i tried installing official jb using sp tools!! but the phone is not coming on!! what so ever!!
      pl help!! i feel so screwed!!

      Delete
    6. don't worry about it

      remove battery then put it again

      do not switch on your mobile

      click down load button

      then connect your off mobile to PC

      it take few min

      Delete
    7. i gave it time!! now the sp tools cant recognise ma fone itself!!
      also if i put it to charge the charging screen doesnt come on!!

      Delete
    8. can you tell me your phone start or not?

      Delete
    9. no bro it doesnt start!! i tried!! i doesnt start normally or in recovery mode!!

      Delete
    10. bro do u think i have bricked it?? n is it possible to fix ma fone!! pl help!! i m really tensed here!!

      Delete
    11. this phone not hard brick
      it is only soft brick and it is under warranty so, don't worry
      if your will not get back then go to service station

      try to recover

      good day

      Delete
  65. well that helped what u said!! coz i tried to connect my phone to sp tools but the sp tool doesnt recognise my phone!so i cudnt install the rom!! if u have any video or link regarding this problem kindly post it!! thanks

    ReplyDelete
    Replies
    1. i try to make but i need your type phone

      i will try

      Delete
    2. 1. switch off your phone
      2.now remove ur fone's battery and keep it aside.
      3.go to the folder where u have extracted sp flash tools. Run it as administration.
      4.click on scatter loading option and browse for the folder where u have extracted jb(or ics rom).
      5.now click on firmware upgrade option if flashing jb or if flashing ics click download option.
      6.connect ur fone to pc.
      Let the process complete. After it completes reinsert the battery and switch on ur fone.
      And wid this u should have successfully unbricked ur fone..

      Delete
    3. sp tools is not recognising my fone!! n really thanks for all this help guys!! really mean it!! n keep it cming!!

      Delete
    4. i gave my canvas 2 to service station n they said may be ic is not working n they will check n tell!! meanwhile i kindly ask u to find some ways if possible to fix this problem of mine!! thanks!

      Delete
    5. if your phane has IC problem then i can't help you because it is hardware issue.

      and you have hardware issue then it is free service by service center because your phone is in warranty

      Delete
    6. bro! my canvas 2 is not coming on! its completely dead!! this happened after i was trying to install stock rom using sp tools but the process dint take place properly after which my phone got bricked i guess!! i tried removing battery n then trying flashing but sp tools dint recognise my fone!! please help!! i am waiting for ur reply!!

      Delete
    7. charge your phone 2 hours
      then open sptool run sptool.exe as administrator if you are use windows 7 or 8 and vista then load scatter file
      click to download button after that connect your phone via USB cable to PC
      after few min PC recognize your phone and process will start
      after complete start your phone

      good luck

      Delete
    8. bro i tried that but sp tools didnot recognise my phone!! i kept it for long time!! please help!! my phone is dead from past one week!! is there any way i can talk to u or probably give u my phone n u cud fix it for me!!

      Delete
    9. i want to try but ......
      which operating system you are use?
      did you try different port of USB like back penal?
      did you charge your phone, because some time problem is battery drain ?
      could you try another way to battery charge?
      did you try different USB cable ?

      Delete
    10. win 7 os in my laptop!! and i have no other way to charge my phone!! only 1 usb cable!!n when i connect the laptop recognises it but then after some time it shows unidentified device n driver dint install! thats why sp tools also doesnt recognise the phone!!

      Delete
    11. which Win 7 os 64bit or 32 bit ?
      and i think your USB cable fault behind this problem
      can you try vcom driver if not then watch this video click here

      Delete
    12. its 32 bit!! and i installed almost all the driver looking at the post from ur site only!!

      Delete
    13. vcom driver is must so try once again

      and i thing change your USB cable then try

      Delete
    14. vcom is installed!! i saw ur video!! n using this cable only i rooted ma phone earlier!! this cable is fine!! but still i will change the cable n try!! but i think u can take my phone and try once!! :P r u in mumbai!!

      Delete
    15. no dear, i am much far from you

      ok try then tell me
      good luck

      Delete
    16. hey man i m back with some trouble!! i had given ma phone to customer care mmx!! but they r returning the phone to me n sed they cant repair it!! :( i really need ur help!! N thanks a lot for all the suppory earlier!! really appreciate ur work!!

      Delete
    17. ok recharge your battery any other way it should be charge 80% then try to flash your phone

      good luck

      Delete
    18. try it

      1. Remove your battery once and fit it back.
      2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
      3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
      5. Don't leave the power button immediately.
      6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
      7. After this the boot logo will come. Once it comes, your mobile will start charging.

      Delete
  66. hey dear....once again i need ur help...i buy a new handset named sony xperia E dual....and nw i wanna root it...so will u plz tell me how to root it...!..plz reply as early as possible....!

    ReplyDelete
    Replies
    1. posted
      how to root Sony xperia E

      go to home page then read this post

      Delete
    2. Sony xperia E http://skyneel.blogspot.in/2013/08/How-to-Root-Sony-xperia-E-phone-in-easy-steps.html

      Delete
  67. hey bro i hv tried many times over this process bt it is not working properly....so plz send me another method to root my xperia E dual...!

    ReplyDelete
    Replies
    1. this is Micromax A110 rooting method

      you try this for root click here

      Delete
  68. Hey Bro..
    firstly thanks for posting this.. :)
    I have upgraded to Jelly bean yesterday and now i wanna root my A110
    i have followed all the steps mentioned, but when i run the Update-superSU-V1.04.zip..
    it says installation aborted, i am not sure where i am going wrong, Also where do i find the ROM folder in SD card
    Could you please help me..?

    thanks

    ReplyDelete
    Replies
    1. enjoy jelly bean

      i thing your phone not rooted
      so root again
      then install superSU-V1.04.zip
      watch my video how to root jelly bean click Here

      Delete
  69. sp tool error code 3013.every think ok but when i click download and connect phone,its remove automatic so sp tool give error.all driver are ok.plz help me Brother........

    ReplyDelete
  70. Bro! my micromax canvas 2 was in boot loop of some custom rom. so when i tried to install stock rom using sp tools it showed some error and the flash process stopped midway. Now i cant switch on my phone. its completely dead. Help please. i read earlier comments. is my phone bricked?? :(

    ReplyDelete
    Replies
    1. ok recharge your battery any other way it should be charge 80% then try to flash your phone

      good luck

      Delete
    2. try it
      1. Remove your battery once and fit it back.
      2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
      3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
      5. Don't leave the power button immediately.
      6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
      7. After this the boot logo will come. Once it comes, your mobile will start charging.

      Delete
    3. thanks!! i hope this works!! i charged my battery and tried flashing but when i connect my phone to the laptop..my laptop shows unindentified device n sp tools doesnt recognise ma phone!! i have all drivers installed!! God its killing me!!

      Delete
    4. it means you didn't install vcom driver

      watch this video then install vcom driver click here

      Delete
  71. Thanks,ABHISHEK.My A110 running on jellybean Rooted with your help .thanx.

    ReplyDelete
    Replies
    1. welcome

      Join us on Facebook and Google +

      Delete
  72. i try it many time but not flashing.with 99% bettry

    ReplyDelete
    Replies
    1. it means you didn't install vcom driver

      watch this video then install vcom driver click here

      Delete