Mobistel Cynus T2 ROM so stable and perfect work for Micromax A110

Mobistel Cynus T2 Rom Features and installation guide.  Cynus T2 outstanding Rom and much better as compare Micromax Rom.

 Mobistel Cynus T2:-
  • 12MP Rear Camera
  • 1.3MP Front Camera
  • Better Speed in 3G
  • Great Sound output than both the stock ROMS (V1 & V2)
  • Better adobe flash performance in browsers
  • Brighter Flash intensity than V2
  • Lesser battery drain compared to both the stock ROMS
  • Super smooth and Super Stable
  • Comes with official Mobistel UI
  • TV out
  • GPS locks faster  
        
Download Mobistel Cynus T2 click here

Mobistel Cynus T2 Rom Flashing Steps:
  1. First copy the ROM in your internal SD card.
  2. Switch off phone after few second.
  3. Press (Vol+) + (Vol-) + Power same time, Then press Vol+ button for Recovery Mode
  4. Select option “apply Update form sdcard
  5. Select file “CynusT2Software (Ver.7).zip”
  6. Process begin after Flash ROM
  7. Reboot the device.
  8. Go to settings-backup & reset-factory data reset.
  9. After reset if language change the go system setting ---> language & input (use idea of your to select this option because language is change  ---> select first  option change English  "Best of Luck"   

If you find some problem please comments below.

Mobistel is launch Jelly Bean update in the first week of Feb. This ROM was so stable and perfect for our device. We are not responsible for anything. This ROM has been tested 100% working before posted.


TRY AT UR OWN RISK.  I AM NOT RESPONSIBLE FOR BRICKING UR DEVICES, DEAD SD CARDS AND MANY THINGS.

91 comments:

  1. thanks its rocks, nice camera quality

    ReplyDelete
    Replies
    1. yes and it get advantage to Jelly bean in feb

      Delete
  2. I'm facing an issue. It says,

    "status 7
    installation aborted"

    Any solutions?

    ReplyDelete
    Replies
    1. it's result "installation aborted"

      before it, what's error show?

      Delete
  3. How to get the t2 TV patch for MMX A110?

    ReplyDelete
    Replies
    1. i will post for you keep check my blog

      good day

      Delete
  4. I had a problem with installation it was asking update.zip do i remove first two lines from updater-script
    the installtion was done but my phone didn' boot it was only showing superfone|canvas2 icon for 2 to 3 mins

    ReplyDelete
  5. I had a problem with installation it was asking update.zip do i remove first two lines from updater-script
    the installtion was done but my phone didn' boot it was only showing superfone|canvas2 icon for 2 to 3 mins and getting booted please help me

    ReplyDelete
  6. flash with SP tool Stock ROM V2 before change vivid display file
    read more :-http://skyneel.blogspot.in/2013/01/Micromax-A110-Vividness-features-in-Stock-Rom-V2-Like-V1.html

    ReplyDelete
  7. please, my language changed and i dont know how to fix it back to English,i need help here

    ReplyDelete
    Replies
    1. Press menu button select last option Go to Setting and scroll down third menu chat "personal" fourth option "A" icon option select and first option language select English language

      Enjoy & Join Us

      Delete
  8. I've updated from V2 to Cynus T2 ROM. After factory reset in T2 ROM, I'm facing network issues. Both the sim cards are not able to receive the network at all. Unable to make calls.Please help.

    ReplyDelete
    Replies
    1. do 3g enable or disable and reboot your pone

      Delete
    2. if not fix the flash T2 again

      Delete
  9. i am also facing same issue as said by pramod please provide a quick solution.
    My airtel 2g is not detecting but 3g is working fine.

    ReplyDelete
    Replies
    1. hi go to setting ---> network ---> 3G Enable ---> off 3G service

      and reboot, i thing it should work for you.

      if not working then comment again.

      join us this site & Facebook also

      Delete
    2. I have done the above settings given but still it is not working.
      Please provide a quick solution as mostly it is showing no signal

      Delete
  10. I have done the above settings given but still it is not working.
    Please provide a quick solution as mostly it is showing no signal

    ReplyDelete
    Replies
    1. take backup & flash T2 again

      if not working then flash V2 then install t2 and not rest your mobile

      good day

      Delete
    2. but not working 2G sim

      Delete
    3. download modem.img (stock Rom V2) from my blog link is here:----> http://skyneel.blogspot.in/2013/02/How-to-resolve-one-SIM-issue-in-Micromax-A110-with-Jelly-Bean-t2.html

      and replace modem.img with system/etc/firmware/modem.img

      and reboot your phone

      good day

      Delete
    4. hi tried replacing the file and replace modem.img with system/etc/firmware/modem.img thru es gfile explorer but it cant be replaed kindly help me.

      Delete
  11. No Link found of Mobistel Cynus !!!

    ReplyDelete
    Replies
    1. here r u
      http://skyneel.blogspot.in/2013/02/Jelly-Bean-for-Micromax-A110-and-Mobistel-Cynus-T2.html

      Delete
  12. hey bro! i intalled it. it is working perfectly.. but now my superuser app is gone and the device becomes unrooted . i use all tools to root it, but all softwares says permission: mount (are you Root?)
    and it is not rooting the phone. plz help i m not getting root permissions in any rooted app plzzzzzz help and pm me
    nish28sharma@gmail.com

    ReplyDelete
    Replies
    1. Read this post:-
      http://skyneel.blogspot.in/2013/02/How-to-update-Micromax-A110-with-Mobistel-Cynus-T2-Jelly-Bean-Step-by-step.html

      Step 3
      Download SuperSUPro zip & Copy your SD Card


      Step 4
      Download cwm/lewa recovery.img file Replace with stock ROM V2 recovery.img
      With SP Flashtool load scatter file only flash recovery.img, un-check other all file
      After flash recovery.img do not start your phone go direct recovery mode by Pressing power and both volume buttons together in same time
      Flash supers pro zip and reboot.

      for V2 SP Flashtool and scatter file read this
      http://skyneel.blogspot.in/2012/12/Micromax-a110-Stock-Rom-v2-Increase-Internal-Memory-1.48-GB.html

      good luck

      Delete
  13. i also flashed this rom 2 times but after flashing rooting is not done... i want to use roo plz help

    ReplyDelete
    Replies
    1. http://skyneel.blogspot.in/2013/02/How-to-update-Micromax-A110-with-Mobistel-Cynus-T2-Jelly-Bean-Step-by-step.html

      Delete
  14. going to do that again.. be right back after flashing again

    ReplyDelete
  15. hey bro after installing mobile uncle it says u need root access to change recovery
    plz help

    ReplyDelete
    Replies
    1. ok
      do this
      first to open sptool ok
      download CWM/TWRP Recovery.img
      rename it recovery.img copy and past in stock rom V2 folder
      replace with stock v2 rom recovery
      then load scatter file in sp tool ok
      and flash it
      do not power on your mobile
      press power button+Vol up +Dwon keyin same time
      choose recovery mode
      install SuperSUPro.zip file
      i thing your problem will solve

      good day

      Delete
  16. I take backup f my stock rom but now it is not restoring it says installation aborted...
    so can you plz provide me link for the stock ROM of mmx a110 so that i can start it from there again plzzzzz bro!!! plz i need it.

    all i need is root permission . so plz give me stock Rom link so that i can root my device again and install mobistel cynus 2 after that plz

    Thankyou

    ReplyDelete
    Replies
    1. http://skyneel.blogspot.in/2012/12/Micromax-a110-Stock-Rom-v2-Increase-Internal-Memory-1.48-GB.html
      download and install

      Delete
    2. your backup is your ics rom and you want to restore in Jelly bean
      how is possible, so give error installation aborted...

      dont worry flash recovery.img from sptool and install SuperSUPro.zip file

      get root access

      Delete
  17. thanx bro
    My Stock rom is installed now i can do anything as u say i will install ur rom... any ways i wanna share stock rom link to you..
    here it is!!!!:
    http://mmxa110.x10.mx/stock-roms-for-micromax-a110-official-roms/

    ReplyDelete
    Replies
    1. dear friend
      i am also provide stock V2 Rom link & installation steps in this post. this is original Stock ROM with SP Flash Tool for you and this blog viewers.

      Read this: - http://skyneel.blogspot.in/2012/12/Micromax-a110-Stock-Rom-v2-Increase-Internal-Memory-1.48-GB.html

      Delete
    2. I did these steps but at step of download recvery. Img red ribnion is apperaing but not yellow saying connect usb in some seconds iwanna root back my phone

      Delete
  18. hey bro can you help me with the v2 rom vivid file????
    what is vivid file and how to flash it?

    plzzzzzzzz

    ReplyDelete
    Replies
    1. good morning

      Read this post : - http://skyneel.blogspot.in/2013/01/Micromax-A110-Vividness-features-in-Stock-Rom-V2-Like-V1.html

      this post have vivid file & Step to install these file

      Delete
  19. hiii
    when i installed it an error message comes

    E failed to verify whole file signature
    E signanature verifification failed
    instlation abroded
    pls help

    ReplyDelete
    Replies
    1. read this post careful and do all steps

      http://skyneel.blogspot.in/2013/02/How-to-update-Micromax-A110-with-Mobistel-Cynus-T2-Jelly-Bean-Step-by-step.html

      if you will get any problem then give me comments

      good day

      Delete
  20. Any one please help i ve successfully installed this rom but in terms of rooting this rom i m unable to do it. using flash tools n by choosing the recovery.img from path nothing happening plz help

    ReplyDelete
    Replies
    1. replace recovery.img in stock V2 Rom folder

      open SP tool
      Load Scatter file untick all
      tick only Recovery.img file
      flash it

      don't power on
      press Power button +Vol.up & down key in same time
      install Superpro update.zip file
      reboot

      Delete
    2. i did what u said but doesnt working help me bro
      when i clicked on firmware->upgrade it said check weather all images are loaded properly i pressed ok.
      i tried to install super pro update but it says installation aborted but doesnt help it always strucks at 0% doesnt move forward no green ring as i only selected recovery and browsed for it on local drive.
      i m struck on stock recovery requires cwm becuz i require pre rooted rom help..........

      How to replace recovery.img in stock V2 Rom folder May be i m doing it wrong

      Help plzzzzzzzzzzzz.................

      Delete
    3. Can u plz elaborate the process or upload the detailed video of this process in youtube or on ur site plzzz sir.......

      Delete
    4. replace recovery.img in stock V2 Rom folder

      open SP tool
      Load Scatter file, untick all Items
      tick only Recovery.img file
      Click on Download
      then connect switched off phone
      SP tools read your phone
      process began, and green ring appear
      don't power on your phone
      press Power button +Vol.up & down key in same time
      click power up button
      choose recovery mod
      install SuperSUPro.zip file
      reboot
      Enjoy

      root Jelly Bean Cynus T2

      Delete
    5. Nopes still not working help
      when i press download i always get a warning that Not All The Images Are Loaded Properly Still Want To Continue I press ok but it always struck at zero per and not moving forward help.
      ..............

      Delete
  21. what is use of wipe battery cache is it necessary before install new ROM using cwm?

    ReplyDelete
    Replies
    1. if battery show wrong state
      then wipe battery cache

      Delete
  22. in suvi rom after 90% charging green led glows if i remove charging port n plug it again then orange led glow(not red led). so will wipe battery cache solve this problem?

    ReplyDelete
    Replies
    1. wipe battery cache

      or

      use Mobistle Cynus T2 Stock ROM

      STOCK Rom is best & Customize your self

      Delete
  23. dead my Mobistle Cynus T2 not a flash sp tool plzz help me how testpoint ???? buntydk1@gmail.com

    ReplyDelete
    Replies
    1. Mobistle Cynus T2 is update-able so it is not flashable
      for flash Mobistle Cynus T2 required this rom own flashable tool
      best way update on Stock Rom V2

      Delete
  24. my mobile network dsnt work wht to do can i degrade again to ics if yes plzz let me knw how

    ReplyDelete
    Replies
    1. replace modem.img from stock Rom V2 to Cynus T2 Rom

      resolve Network Problem in Cynus T2

      read this post

      Delete
  25. Sir, plz help me I wanna root my phone or iwanna revert to stock Rom for root access,I used lots of methods as flash tools by stock Rom,after red ribbionl it doesnt processing to yellow sir plz help me

    ReplyDelete
  26. Dear Abhishek,
    You r doing great job and i love your skills.
    Iam from pakistan i was the user of galaxy s7562 and now using qmobile a10 (same as Micromax a110) and dont like the sms and contacts stock apps of a10 as compare to s7562.
    pl tell me if i upgrade to cynus t2 jb rom then i get any better changes to mms.apk and contacts.apk .

    RAZA

    ReplyDelete
    Replies
    1. yes update your phone with cynus t2 jb rom

      nice ROM

      Delete
  27. is any difference between cynus t2 and JMP Extreme ROM?

    ReplyDelete
    Replies
    1. Cynus T2 is Stock Rom & JMP is modified ROM according to him

      my suggestion is stock Rom is best & modified ROM according to you

      Delete
  28. Thanks HERO,,you are the HERO,

    I update the fone last night successfully.
    Area of my concern is same bcz mms.apk and contacts.apk contain same files as in old ice cream version.Even files creation date is same.
    Two issues in both ROM's are same..

    1-Both have not DATE OF BIRTH column in contacts
    2-both ROM's have contacts groups but can't access (find) the groups when you want to send t sms to a groups.

    Please guide me for both issues.
    Regards

    ReplyDelete
    Replies
    1. if you have gmail account then import your phone contact in your gmail account & manage DoB and lots of more
      then export contact file copy in your phone and import

      or if you add gmail account in your phone then click on display contact to gamil account

      Delete
    2. open MSG click to contact+ icon --> click group icon ---> select group --> ok--> and send


      Delete
    3. THANKS brother,
      You are the real HERO.

      My issue Solved.

      GOD BLESS YOU & YOUR FAMILY.

      Delete
  29. Now i have cynus t2 jelly bin ROM in my Qmobile A10 (Thanks to Abhishek Sharma for this).

    Now help me to

    1) Increase 100 sms p/hour limit.
    2) Remove converting mms of text larger than 3 sms size.

    ReplyDelete
    Replies
    1. i thing it is depend on network services

      Delete
  30. Hey friends help me..
    I can't rooted my phone canvas 2 running on jb Cynus t2 rom..
    I

    ReplyDelete
  31. HOW TO REMOVE CYNUS TS FROM CANVAS 2 ????????????
    I WANT TO INSTAL OFFICIAL JELLY BEAN.
    SO ANYONE CAN HELP ME???????????????????????????

    ReplyDelete
    Replies
    1. take a backup of your Mobile
      and flash official Jelly bean V3
      read this post it is help you
      Click Here

      Delete
  32. Whose best for my canvas 2 ....
    Cynus t2 ya Micromax official job...

    ReplyDelete
    Replies
    1. Best is Cynus T2 Jelly Bean Rom

      but if issue of warranty then best Rom Micromax Jelly Bean

      but my way use Cynus T2 Jelly Bean Rom best rom for Micromax A110

      Delete
  33. Hey help me yaar...
    Play store say server earror.....
    And facebook bhe nahe khul rahe Thai.....
    I used Cygnus t2 rom...

    ReplyDelete
    Replies
    1. reflash Cygnus t2 Jelly Bean Rom

      Delete
  34. Nothing is happen....
    I flashed many time...

    ReplyDelete
  35. hELLO ABHISHEK . i HAVE SAMSUNG nOTE AND MICROMAX A110. I WANT TO KNOW HOW I CONNECT BOTH MY MOBILES WITH mY TV. PLEASE RESOLVE MY PROBLEM

    ReplyDelete
    Replies
    1. use OTG cable & USB to HDMI cable

      Delete
    2. Please provide link to buy USB to HDMI cable

      Delete
  36. HOW TO CONNECT MICROMAX A110 TO TV AV CABLE

    ReplyDelete
  37. Pls confirm can Canvas HD 116 support MHL HDMI TV output

    ReplyDelete
  38. This comment has been removed by the author.

    ReplyDelete